The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm.
HONDA















HONDA GENUINE OIL
- Developed for Honda Power Product Engines and tested by Honda R&D.
- Genuine Engine Oil researched to give maximum engine performance for Honda Power Products Engines.
- For effective performance, it is essential to recommend Honda Genuine Engine Oil for Honda Power Product Engines.
BENEFITS OF HSPP GENUINE OIL
Reduce friction in lubricating parts and prevent friction losses
Prevent heating in all parts of the engine
Prevent leakage of compressed gas and combustion products from flowing into crank case.
Prevent pollution of degradation products to engine.
Supply of lubricants to all parts of engine.
Prevent corrosion of air and water to metal.
- OHV design enhances combustion efficiency
- High power-to-displacement ratio
- Easy starting with an automatic decompression system and an easy-to-grip soft recoil starter handle
- High quality materials and purpose-built components which ensure reliable, long-term use
- Meets world's most stringent environmental legislation
- Low fuel and oil consumption
- Reduced vibration and noise levels
MODEL SPECIFICATIONS
Engine type: | 4-stroke single cylinder, OHV petrol engine, 25° inclined cylinder, Horizontal shaft |
Cylinder sleeve type: | Cast iron sleeve |
Bore x Stroke: | 68 x 54 mm |
Displacement: | 196 cm?3; |
Compression ratio: | 8.5 : 1 |
Net power: | 4.1 kW ( 5.5 HP ) / 3600 rpm |
Cont rated power: | 3.3 kW ( 4.4 HP ) / 3000 rpm, 3.7 kW ( 5.0 HP ) / 3600 rpm |
Max. net torque: | 12.4 Nm / 1.26 kgfm / 2500 rpm |
Ignition System: | Transistorised |
Starter: | Recoil (el. start optional) |
Fuel tank capacity: | 3.1 Liter |
Fuel cons. at cont. rated power: | 1.7 L/h - 3600 rpm |
Engine oil capacity: | 0.6 Liter |
Dimensions (L x W x H): | 321 x 376 x 346 mm |
Dry weight: | 16.1 kg |
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SPECIAL FEATURES
POWER CURVE
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.
BRUSH CUTTERS
UMK435T U2NT
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors.
- 4-stroke
- 2 Blade Cutter
- Semi-dry Type
- Over head Cam Single Cylinder
MODEL SPECIFICATIONS
Model: U2NT
Cutter Type: | 2 Blade Cutter |
Overall Length* (mm): | 1928 |
Cutter Dia (mm): | 305 |
Operating Wieght (kg): | 8.45 |
Engine
Engine: | GX35 |
Engine Type: | 4-stroke, Over head Cam Single Cylinder |
Displacement: | 35.8 cc (2.2 cu-in) |
Maximum HorsePower: | 1.3 HP |
Compression ratio: | 8.0 : 1 |
Cooling System: | Forced Air |
Ignition System: | Transistorized Magneto Ignition |
Air Cleaner: | Semi-dry Type |
Oil Capacity: | 0.1 litre |
Starting System: | Recoil Starter |
Fuel
Fuel: | Unleaded Gasoline |
Fuel Tank Capacity (Ltrs.): | 0.63 Litre |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SALIENT FEATURES
HONDA BRUSH CUTTER
The ideal solution for cutting dense undergrowth, unwanted weeds, pruning trees & trimming hedges.
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors. The unique Honda mini 4-stroke engines are reliable, efficient and quiet, making them kinder to the environment yet offering you superb performance.
Quiet & lightweight Honda 4-stroke Brush Cutter delivers a heavyweight performance to tackle the jobs which mowers can't. From heavy undergrowth to saplings, Honda Brush Cutter gives you total control!
SPECIAL FEATURES
FULL POWER
- Delivers Highest power in its engine class
- Ideal for heavy duty work due to high torque even at low rev.
SUPER ECONOMY
- Up to 50% economical as compared to 2-stroke engine based models
THE 4-STROKE ADVANTAGE
Remarks: Based on 600 hrs of usage in a year. Savings calculated when compared with typical 40 cc 2-strokes engine available intemationally.
4-STROKE OVER HEAD CAMSHAFT ENGINE.
- Powerful Engine
- Highest output compared to engines of similar size.
- Swift revolution response.
- Cost efficent
- Up to 50% economical as compared to 2-stroke engine based models.
- Robust and durable
- Suitable for tough and rugged terrains.
- Ease of work
- Light Weight
- East start
- Low vibration
- Environment Friendly
- New engine conforms to EPA2005 standard of US with respect to emissions
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm.
- OHV design enhances combustion efficiency
- High power-to-displacement ratio
- Easy starting with an automatic decompression system and an easy-to-grip soft recoil starter handle
- High quality materials and purpose-built components which ensure reliable, long-term use
- Meets world's most stringent environmental legislation
- Low fuel and oil consumption
- Reduced vibration and noise levels
MODEL SPECIFICATIONS
Engine type: | 4-stroke single cylinder, OHV petrol engine, 25° inclined cylinder, Horizontal shaft |
Cylinder sleeve type: | Cast iron sleeve |
Bore x Stroke: | 68 x 45 mm |
Displacement: | 163 cm?3; |
Compression ratio: | 9.0 : 1 |
Net power: | 3.6 kW ( 4.8 HP ) / 3600 rpm |
Cont rated power: | 2.5 kW ( 3.4 HP ) / 3000 rpm, 2.9 kW ( 3.9 HP ) / 3600 rpm |
Max. net torque: | 10.3 Nm / 1.05 kgfm / 2500 rpm |
Ignition System: | Transistorised |
Starter: | Recoil (el. start optional) |
Fuel tank capacity: | 3.1 Liter |
Fuel cons. at cont. rated power: | 1.4 L/h - 3600 rpm |
Engine oil capacity: | 0.6 Liter |
Dimensions (L x W x H): | 312 x 362 x 346 mm |
Dry weight: | 15.1 kg |
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SPECIAL FEATURES
POWER CURVE
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.
Disclaimer:Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice
Petrol Water Pumping Sets
WBK30
Honda Pump sets are manufactured in India, in collaboration with the renowned Honda Motor Co., Japan. They incorporate the most advanced 4-stroke technology assuring you of the most reliable performance. The latest Honda technology and stringent quality - control tests carried out extensively in the new Honda Portable Pump set ensure trouble-free service, year after year, saving you a lot on repair.
- Pump Size(mm): 80x80
- Maximum Output Head (Metres) : 28
- Maximum Output Discharge (Litres per minute) : 800
MODEL SPECIFICATIONS
Engine Parameters
Type: | Air Cooled 4 stroke, S.P. Petrol start kerosene run Engine. |
Model: | WBK30 |
Model: | GK 200 |
Displacement (cc): | |
Rated Power (KW) | 2.9 kW/3600 RPM |
Fuel | Petrol start kerosene run |
Pump Parameters
Type: | Self Priming Pump |
Size (mm): | 80 * 80 |
Max. Head (Metres): | 26 |
Max. Discharged (Ltr/Min): | 800 lts/min |
Weight (Kg.): | 27 |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SALIENT FEATURES
Oil Alert | |
Priming | Self |
Pump Material | Aluminum Alloy |
Multi Crop Lever | |
Frame | Tubular Frame (OPTIONAL ) |
Fuel Tank | 3.1 Ltr. |
SPECIAL FEATURES
INTERNATIONAL HONDA TECHNOLOGY
Honda Pump sets are manufactured in India, in collaboration with the renowned Honda Motor Co., Japan. They incorporate the most advanced 4-stroke technology assuring you of the most reliable performance. The latest Honda technology and stringent quality - control tests carried out extensively in the new Honda Portable Pump set ensure trouble-free service, year after year, saving you a lot on repair.
A BOON TO SMALL FARMERS
The new Honda Portable Pump sets are designed for irrigating small land holdings up to 5 acres. Its easy portability also makes it very useful for irrigating scattered and distant fields. It is indeed a special boon to small and marginal farmers who cultivate paddy, vegetables and various other seasonal crops.
EASY PORTABILITY
All Honda Pump sets are so light and handy that you can easily carry it on a bicycle or in your hands. When the work is over, you can bring it back home for safekeeping. So now you needn't be bogged down by heavy, cumbersome pump sets.
SELF-PRIMING TECHNOLOGY
Honda Pump sets feature the self-priming technology (available in select models), which makes it absolutely hassle free for the farmer to carry out his operations. Also, you don t require Foot Valve.
EASY START
With Honda Portable Pump sets you can be free of tiresome and time consuming task of starting a pump set. A Recoil Starter and other superior in-built features permit quick and smooth start. Anytime and Every time.
MULTI-CROP IRRIGATION LEVER
This unique feature in Honda Portable Pump sets regulates the flow of water during irrigation. Be it paddy or potato, depending on the requirement of your specific crop, you can control the flow of water by a mere shift of this lever, without switching off the pump set.
PROMPT AFTER SALES SERVICE
All Honda Portable Pump sets come with Honda's guarantee of quality, so breakdowns are rare. However, if you do need help, Honda's countrywide Dealer Network extends prompt after sales service and ensure easy availability of genuine spare parts.
disaster management, flood control, dewatering pump, agriculture pumpset, horticulture pump, booster pump,
BRUSH CUTTERS
UMK435T U2ST
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors.
- 4-stroke
- 2 Blade Cutter
- Semi-dry Type
- Over head Cam Single Cylinder
MODEL SPECIFICATIONS
Model: U2ST
Cutter Type: | 2 Blade Cutter |
Overall Length* (mm): | 1928 |
Cutter Dia (mm): | 305 |
Operating Wieght (kg): | 8.45 |
Engine
Engine: | GX35 |
Engine Type: | 4-stroke, Over head Cam Single Cylinder |
Displacement: | 35.8 cc (2.2 cu-in) |
Maximum HorsePower: | 1.3 HP |
Compression ratio: | 8.0 : 1 |
Cooling System: | Forced Air |
Ignition System: | Transistorized Magneto Ignition |
Air Cleaner: | Semi-dry Type |
Oil Capacity: | 0.1 litre |
Starting System: | Recoil Starter |
Fuel
Fuel: | Unleaded Gasoline |
Fuel Tank Capacity (Ltrs.): | 0.63 Litre |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SALIENT FEATURES
HONDA BRUSH CUTTER
The ideal solution for cutting dense undergrowth, unwanted weeds, pruning trees & trimming hedges.
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors. The unique Honda mini 4-stroke engines are reliable, efficient and quiet, making them kinder to the environment yet offering you superb performance.
Quiet & lightweight Honda 4-stroke Brush Cutter delivers a heavyweight performance to tackle the jobs which mowers can't. From heavy undergrowth to saplings, Honda Brush Cutter gives you total control!
SPECIAL FEATURES
FULL POWER
- Delivers Highest power in its engine class
- Ideal for heavy duty work due to high torque even at low rev.
SUPER ECONOMY
- Up to 50% economical as compared to 2-stroke engine based models
THE 4-STROKE ADVANTAGE
Remarks: Based on 600 hrs of usage in a year. Savings calculated when compared with typical 40 cc 2-strokes engine available intemationally.
4-STROKE OVER HEAD CAMSHAFT ENGINE.
- Powerful Engine
- Highest output compared to engines of similar size.
- Swift revolution response.
- Cost efficent
- Up to 50% economical as compared to 2-stroke engine based models.
- Robust and durable
- Suitable for tough and rugged terrains.
- Ease of work
- Light Weight
- East start
- Low vibration
- Environment Friendly
- New engine conforms to EPA2005 standard of US with respect to emissions
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm.
- OHV design enhances combustion efficiency
- High power-to-displacement ratio
- Easy starting with an automatic decompression system and an easy-to-grip soft recoil starter handle
- High quality materials and purpose-built components which ensure reliable, long-term use
- Meets world's most stringent environmental legislation
- Low fuel and oil consumption
- Reduced vibration and noise levels
MODEL SPECIFICATIONS
Engine type: | 4-stroke single cylinder, OHV petrol engine, 25° inclined cylinder, Horizontal shaft |
Cylinder sleeve type: | Cast iron sleeve |
Bore x Stroke: | 68 x 54 mm |
Displacement: | 196 cm?3; |
Compression ratio: | 8.5 : 1 |
Net power: | 4.1 kW ( 5.5 HP ) / 3600 rpm |
Cont rated power: | 3.3 kW ( 4.4 HP ) / 3000 rpm, 3.7 kW ( 5.0 HP ) / 3600 rpm |
Max. net torque: | 12.4 Nm / 1.26 kgfm / 2500 rpm |
Ignition System: | Transistorised |
Starter: | Recoil (el. start optional) |
Fuel tank capacity: | 3.1 Liter |
Fuel cons. at cont. rated power: | 1.7 L/h - 3600 rpm |
Engine oil capacity: | 0.6 Liter |
Dimensions (L x W x H): | 321 x 376 x 346 mm |
Dry weight: | 16.1 kg |
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SPECIAL FEATURES
POWER CURVE
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.
EX2400SN RECOIL CUM SELF STARTDue to the Honda's innovative technology, this new age generator is so silent that you might actually want to check if its on. In fact to make it a complete standby power source, every possible detail has been kept in mind while designing its features.•4 Stroke, Overhead Valve, Single Cylinder•Transistorized Magneto IgnitionModel:GX160DEngine Type:4 Stroke, Overhead Valve, Single CylinderDisplacement:163 Cm3Bore * Storke:68.0 * 45.0 mmCooling System:Forced AirIgnition System:Transistorized Magneto IgnitionEngine Oil Capacity:0.58LFuel Tank Capacity:9.4LSpark Plug:BPR6ES (NGK)• Weight & Dimensions• Description Code:EEMDLength:985 mmWidth:471 mmHeight:722 mmDry Mass (Weight):91.0 Kg• Generator (Ac Output)• Rated Voltage:230 VRated Frequency:50 HZRated Ampere:7.8 ARated Output:1.8 kVAMax Output:2.1 kVA•Disclaimer:•Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.WARRANTY 6 MONTHS BY MANUFACTURER AT THEIR RESPECTIVE SERVICE STATIONS PAN INDIA.
Inverter Generators
EU30isN2
Due to the Honda's innovative technology, this new age generator is so silent that you might actually want to check if its on. In fact to make it a complete standby power source, every possible detail has been kept in mind while designing its features.
Specifications, subject to change without notice.
- 2800 VA
- Ultra Silent, Portable & Compact
- Runs AC and many other appliances
Capacity
Max. Output: | 3000 VA |
Rated Output 230v / 50 Hz: | 2800 VA |
Engine
Engine Type: | HONDA GX200T/OHV, Single Cylinder, Air Cooled |
Engine Throttle: | Electronic Governor (Load Sensitive) |
Engine Control Panel Display: | i-Monitor Equipped |
Choke | Auto |
Starting | Electric / Recoil Start |
Fuel
Fuel Type: | Unleaded Petrol |
Fuel Tank Capacity (Ltrs.): | 12.5 |
Weight & Dimensions
Dry Weight (Kg): | 62 kg. |
Dimensions (LxWxH mm): | 710 x 482 x 570 |
Highlights
Oil Alert System: | Yes |
AC Circuit Protection Device: | Yes |
Pilot Lamp: | Yes |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
Kerosene Engines
GK200
The multipurpose portable engines are manufactured in collaboration with the Honda Motor Company, Japan. Armed with the latest, world-renowned 4-stroke Honda Technology, it can out perform any Engine in its class.
- 4 stroke
- Single Cylinder
- Horizontal Shaft
- Transistor Type Magneto Ignition
RATED H.P. 3.1
Parameters
Model: | GK200 |
Type: | 4 stroke, Air Cooled, Single Cylinder, Horizontal Shaft |
Displacement: | 97.7 c.c. |
Engine Net Power *: | 2.6 kW @ 3,600 rpm |
Engine Max. Net Torque *: | 7.9 Nm @ 2,500 rpm |
Fuel Tank Capacity: | 3.3 litre (Kerosene), 0.35 litre (Gasoline) |
Ignition System: | Fly wheel Magneto Ignition, Transistor Type Magneto Ignition |
Air Cleaner: | Oil Bath Type |
Dry Weight: | 17.0 kg |
Dimensions LxWxH: | 330 x 405 x 425 mm |
Highlights
* The Power rating of the engine indicated above is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3,600 rpm (Engine Net Power) and at 2,500 rpm (Engine Max. Net Torque). Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SPECIAL FEATURES
THE LATEST HONDA TECHNOLOGY
The multipurpose portable engines are manufactured in collaboration with the Honda Motor Company, Japan. Armed with the latest, world-renowned 4-stroke Honda Technology, it can out perform any Engine in its class. No wonder, its a marvel when it comes to dependability
EASY START
Equipped with a recoil operated pull start system, the new range of engine makes starting the engine a quick an easy operation. So you can get down to work without wasting precious time. Anytime and Every time.
LIGHT AND STRONG
The Engine is one of the lightest in its category. The in built Honda toughness facilitates easy handling and transportation.
HONDA QUALITY AT WORK
Honda Engines come with a host of value added features for your benefit. The commitment by us to give our customers high quality products, shows in each of our products. Following It s features, give you the best performance in any application.
VAST APPLICATIONS
Honda Engines are used to power many applications. Some of these are in High Tree Power Sprayer, Air Compressor, Rail Drilling Machine, Rail Cutting Machine, Pump sets, Reaper, Concrete Needle Vibrators, Power Trowel, Soil Compactor, Concrete Saw Cutting machine and many more.View Here..
EXCELLENT AFTER SALES SERVICE
Each Honda Engine comes with the Honda guarantee of quality, so breakdowns are rare. However, if you do need servicing or repairs, Honda's countrywide Dealer Network extends prompt after sales service and ensures easy availability of genuine spare parts.
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm.
- The OHV design enhances combustion efficiency
- A variable ignition timing (digital CDI) results in high power output, reduced fuel consumption and excellent exhaust emissions performance.
- Easy starting with an automatic decompression system and an easy-to-grip soft recoil starter handle
- High quality materials and purpose-built components ensure reliable long-term use
- Meets world's most stringent environmental legislation
- Guaranteed low fuel and oil consumption
- Reduced vibration and noise level
MODEL SPECIFICATIONS
Engine type: | 4-stroke single cylinder, OHV petrol engine, 25° inclined cylinder, Horizontal shaft |
Cylinder sleeve type: | Cast iron sleeve |
Bore x Stroke: | 88 x 64 mm |
Displacement: | 389 cm?3; |
Compression ratio: | 8.2 : 1 |
Net power: | 8.7 kW ( 11.7 HP ) / 3600 rpm |
Cont rated power: | 6.4 kW ( 8.6 HP ) / 3000 rpm, 7.0 kW ( 9.4 HP ) / 3600 rpm |
Max. net torque: | 26.5 Nm / 2.7 kgfm / 2500 rpm |
Ignition System: | Digital CDI with variable ignition timing |
Starter: | Recoil (el. start optional) |
Fuel tank capacity: | 6.1 Liter |
Fuel cons. at cont. rated power: | 3.1 L/h - 3600 rpm |
Engine oil capacity: | 1.1 Liter |
Dimensions (L x W x H): | 406 x 460 x 448 mm |
Dry weight: | 31.7 kg |
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SPECIAL FEATURES
POWER CURVE
The power rating of this engine is the net power tested on a production engine for this engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.
Inverter Generators
EU30iN2
Due to the Honda's innovative technology, this new age generator is so silent that you might actually want to check if its on. In fact to make it a complete standby power source, every possible detail has been kept in mind while designing its features.
Specifications, subject to change without notice.
- 2800 VA
- Ultra Silent, Portable & Compact
- Runs AC and many other appliances
Capacity
Max. Output: | 3000 VA |
Rated Output 230v / 50 Hz: | 2800 VA |
Engine
Engine Type: | HONDA GX200T/OHV, Single Cylinder, Air Cooled |
Engine Throttle: | Electronic Governor (Load Sensitive) |
Engine Control Panel Display: | i-Monitor Equipped |
Choke | Auto |
Starting | Recoil Start |
Fuel
Fuel Type: | Unleaded Petrol |
Fuel Tank Capacity (Ltrs.): | 12.5 |
Weight & Dimensions
Dry Weight (Kg): | |
Dimensions (LxWxH mm): | 710 x 482 x 570 |
Highlights
Oil Alert System: | Yes |
AC Circuit Protection Device: | Yes |
Pilot Lamp: | Yes |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
BRUSH CUTTERS
UMK435T U2ST
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors.
- 4-stroke
- 2 Blade Cutter
- Semi-dry Type
- Over head Cam Single Cylinder
MODEL SPECIFICATIONS
Model: U2ST
Cutter Type: | 2 Blade Cutter AND CIRCULAR BLADE WITH GATHERER |
Overall Length* (mm): | 1928 |
Cutter Dia (mm): | 305 |
Operating Wieght (kg): |
Engine
Engine: | GX45 |
Engine Type: | 4-stroke, Over head Cam Single Cylinder |
Displacement: | 45 cc |
Maximum HorsePower: | 2.0 HP |
Compression ratio: | 8.0 : 1 |
Cooling System: | Forced Air |
Ignition System: | Transistorized Magneto Ignition |
Air Cleaner: | Semi-dry Type |
Oil Capacity: | 0.1 litre |
Starting System: | Recoil Starter |
Fuel
Fuel: | Unleaded Gasoline |
Fuel Tank Capacity (Ltrs.): | 0.63 Litre |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SALIENT FEATURES
HONDA BRUSH CUTTER
The ideal solution for cutting dense undergrowth, unwanted weeds, pruning trees & trimming hedges.
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors. The unique Honda mini 4-stroke engines are reliable, efficient and quiet, making them kinder to the environment yet offering you superb performance.
Quiet & lightweight Honda 4-stroke Brush Cutter delivers a heavyweight performance to tackle the jobs which mowers can't. From heavy undergrowth to saplings, Honda Brush Cutter gives you total control!
SPECIAL FEATURES
FULL POWER
- Delivers Highest power in its engine class
- Ideal for heavy duty work due to high torque even at low rev.
SUPER ECONOMY
- Up to 50% economical as compared to 2-stroke engine based models
THE 4-STROKE ADVANTAGE
Remarks: Based on 600 hrs of usage in a year. Savings calculated when compared with typical 40 cc 2-strokes engine available intemationally.
4-STROKE OVER HEAD CAMSHAFT ENGINE.
- Powerful Engine
- Highest output compared to engines of similar size.
- Swift revolution response.
- Cost efficent
- Up to 50% economical as compared to 2-stroke engine based models.
- Robust and durable
- Suitable for tough and rugged terrains.
- Ease of work
- Light Weight
- East start
- Low vibration
- Environment Friendly
- New engine conforms to EPA2005 standard of US with respect to emissions
with a detachable & Flexible shaftmaking it a perfect tool for deweeding in slopy terrains and row de-weeding. Experience a world of comfort in carrying, Sharp and superior Cutting with the all-new Honda 4-Stroke Back Pack Brush Cutter UMR435T Detachable Flexible shaft Cushioned Backpack harness Coil Spring mounted base Fine trigger throttle Loop Handle MODEL SPECIFICATIONS Model: UMR435T L2ST Size (LxWxH) 1928x637x428 mm Dry Weight# 10.20 kg Wet Weight# 11.26 kg Engine Engine Honda GX35T Displacement 35.8 cc Net Power (kw(ps)/rpm) 1.0(1.4)/7,000 Fuel Capacity 0.63 L Engine Weight (kg) Dry 3.46 Wet 4.01 Start System Recoil Starter Clutch System Automatic Centrifugal Frame Handle Type Loop Handle Throttle System Trigger Type Frame Weight 4.04kg Pipe Diameter 28 mm Drive Shaft 8mm
Blade Type/Size 2-Teeth Blade/12"Belt Backpack *Disclaimer: Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification. #Include the weight of provided attachments
BRUSH CUTTERS
UMK435T U2ST
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors.
- 4-stroke
- 2 Way Blade Cutter
- Semi-dry Type
- Over head Cam Single Cylinder
MODEL SPECIFICATIONS
Model: U2ST
Cutter Type: | 2 Way Blade Cutter |
Overall Length* (mm): | 1928 |
Cutter Dia (mm): | 305 |
Operating Wieght (kg): | 8.45 |
Engine
Engine: | GX35 |
Engine Type: | 4-stroke, Over head Cam Single Cylinder |
Displacement: | 35.8 cc (2.2 cu-in) |
Maximum HorsePower: | 1.3 HP |
Compression ratio: | 8.0 : 1 |
Cooling System: | Forced Air |
Ignition System: | Transistorized Magneto Ignition |
Air Cleaner: | Semi-dry Type |
Oil Capacity: | 0.1 litre |
Starting System: | Recoil Starter |
Fuel
Fuel: | Unleaded Gasoline |
Fuel Tank Capacity (Ltrs.): | 0.63 Litre |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SALIENT FEATURES
HONDA BRUSH CUTTER
The ideal solution for cutting dense undergrowth, unwanted weeds, pruning trees & trimming hedges.
Great at tackling those jobs which a mower can't, a Honda Brush Cutter allows you to work through a full 360 degrees & are ideally suited to agriculture, horticulture, lawn/garden maintenance & landscaping sectors. The unique Honda mini 4-stroke engines are reliable, efficient and quiet, making them kinder to the environment yet offering you superb performance.
Quiet & lightweight Honda 4-stroke Brush Cutter delivers a heavyweight performance to tackle the jobs which mowers can't. From heavy undergrowth to saplings, Honda Brush Cutter gives you total control!
SPECIAL FEATURES
FULL POWER
- Delivers Highest power in its engine class
- Ideal for heavy duty work due to high torque even at low rev.
SUPER ECONOMY
- Up to 50% economical as compared to 2-stroke engine based models
THE 4-STROKE ADVANTAGE
Remarks: Based on 600 hrs of usage in a year. Savings calculated when compared with typical 40 cc 2-strokes engine available intemationally.
4-STROKE OVER HEAD CAMSHAFT ENGINE.
- Powerful Engine
- Highest output compared to engines of similar size.
- Swift revolution response.
- Cost efficient
- Up to 50% economical as compared to 2-stroke engine based models.
- Robust and durable
- Suitable for tough and rugged terrains.
- Ease of work
- Light Weight
- East start
- Low vibration
- Environment Friendly
- New engine conforms to EPA2005 standard of US with respect to emissions



Kerosene Engines
GK300
The multipurpose portable engines are manufactured in collaboration with the Honda Motor Company, Japan. Armed with the latest, world-renowned 4-stroke Honda Technology, it can out perform any Engine in its class.
- 4 stroke
- Single Cylinder
- Horizontal Shaft
- Transistor Type Magneto Ignition
- RATED H.P. 4.0
MODEL SPECIFICATIONS
Parameters
Model: | GK300 |
Type: | 4 stroke, Air Cooled, Single Cylinder, Horizontal Shaft |
Displacement: | 272 c.c. |
Engine Net Power *: | 4.0 kW @ 3,600 rpm |
Engine Max. Net Torque *: | 12.4 Nm @ 2,500 rpm |
Fuel Tank Capacity: | 4.1 litre (Kerosene), 0.35 litre (Gasoline) |
Ignition System: | Fly wheel Magneto Ignition, Transistor Type Magneto Ignition |
Air Cleaner: | Semi Dry |
Dry Weight: | 23.0 kg |
Dimensions LxWxH: | 385 X 410 X 470 mm |
Highlights
* The Power rating of the engine indicated above is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3,600 rpm (Engine Net Power) and at 2,500 rpm (Engine Max. Net Torque). Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables |
Disclaimer:
Due to continuous improvement in product on the basis of market feedback above specification are subject to change with out any prior notice. Please contact authorized dealer/distributor for latest specification.
SPECIAL FEATURES
THE LATEST HONDA TECHNOLOGY
The multipurpose portable engines are manufactured in collaboration with the Honda Motor Company, Japan. Armed with the latest, world-renowned 4-stroke Honda Technology, it can out perform any Engine in its class. No wonder, its a marvel when it comes to dependability
EASY START
Equipped with a recoil operated pull start system, the new range of engine makes starting the engine a quick an easy operation. So you can get down to work without wasting precious time. Anytime and Every time.
LIGHT AND STRONG
The Engine is one of the lightest in its category. The in built Honda toughness facilitates easy handling and transportation.
HONDA QUALITY AT WORK
Honda Engines come with a host of value added features for your benefit. The commitment by us to give our customers high quality products, shows in each of our products. Following It s features, give you the best performance in any application.
VAST APPLICATIONS
Honda Engines are used to power many applications. Some of these are in High Tree Power Sprayer, Air Compressor, Rail Drilling Machine, Rail Cutting Machine, Pump sets, Reaper, Concrete Needle Vibrators, Power Trowel, Soil Compactor, Concrete Saw Cutting machine and many more.View Here..
EXCELLENT AFTER SALES SERVICE
Each Honda Engine comes with the Honda guarantee of quality, so breakdowns are rare. However, if you do need servicing or repairs, Honda's countrywide Dealer Network extends prompt after sales service and ensures easy availability of genuine spare parts.