MAGNICRETE

A RANGE OF ECOBUILD PRODUCTS BY SOMANI ECOBUILD PRODUCTS LLP

Sort By:  
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
( GST EXTRA @ 18% ON PRICE + SHIPPING )
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND GST INCLUSIVE @ 18%
COOL ROOFS ANTI HEAT SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND GST INCLUSIVE SHIPPING FREE
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
COOL ROOF SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND GST INCLUSIVE @ 18% SHIPPING FREE
SINGLE COMPONENT POLYMERIZED JOINTING MORTAR GST INCLUSIVE @ 18% FREE SHIPPING AT JAIPUR /AJMER / KISHANGARH / NASIRABAD ONLY ON MOQ 36 BAGS (WITHIN 15 KMS FROM WAREHOUSE )
MAGNISILK 1 KG SUPERIOR WALL PUTTY FOR SILKY FINISH (MAGNISILK1KG)

MAGNICRETE - MAGNISILK - for Silky Finish Walls – Freedom from Flaking and Saving on Paint. “MAGNISILK" is a water-resistant white cement-based dry mix powder which provides a strong base on concrete and plaster both on Internal and External surfaces and ceilings. It is applied after plaster and before painting of the wall. It fills the fine pores of the walls and ceilings, thereby providing a white, smooth and dry surface for painting. Being water resistant it provides a protective base to surfaces which prevents expensive paint from flaking.

MAGNISILK has been formulated with specially designed best in class imported Polymers and Additives for providing more adhesive strength which provides a strong base, ensuring a longer life for the painted surface. It does not require water curing and it can even be applied on freshly plastered wall thus resulting in savings of time and cost. During repainting, the surface done up with "MAGNISILK" requires minimum scrubbing thus eliminating the mess of dust, which is a health hazard especially for asthmatic patients.

Generally Primer is not required after application of "MAGNISILK" before Painting which reduces the time and cost of the additional application process. If applied properly there is substantial increase in the coverage of paint due to "MAGNISILK" water resistance properties and high quality.

Its superior quality ensures that it meets the global standards of HDB, Singapore.


Suitable Substrates:

  • • Concrete Walls
  • • Slabs & Ceilings,
  • • Clay brick masonry
  • • Concrete Block Masonry
  • • Aerated Autoclaved Concrete Block masonry

Features and Benefits:

  • • Being a cementitious material, it has better adhesion and durability with the concrete and mortar walls.
  • • Doesn't need any kind of primer on it before application of paint / distemper thus saving time & cost.
  • • Can be applied on both interior and exterior surfaces
  • • Gives a smooth, white & glossy finish surface.
  • • Effectively reduces the consumption of subsequent Paints & gives true tone of colour.
  • • It is in dry powder form and does not produce any kind of unpleasant smell at the time of application.
  • • It is Eco-Friendly. It does not contain lead, oil or toxic material.
  • • No water curing is required after application thus saving time & cost.
  • • Is water resistant and can be applied on moist surfaces.
  • • Accepts any kind of paint or distemper application on it.
  • • Can be applied on used surface after proper preparation.
  • • It prevents the growth of algae and fungi on walls.
  • • Silky finish to walls/ surfaces
GST 18% EXTRA
MAGNISEAL SUPERIOR WATER PROOFING COATING 5 KG POUCH (GREY) (MAGNISEAL5KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO 250 SQ. FT. AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“ MAGNIISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“MAGNISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

“MAGNISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
“MAGNISEAL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “MAGNISEAL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “MAGNISEAL” or polymer modified mortar prior to coating the entire area prior to the application of “MAGNISEAL”.
Mixing proper and thorough mixing of the “MAGNISEAL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “MAGNISEAL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “MAGNISEAL ” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

“MAGNISEAL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“MAGNISEAL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “MAGNISEAL ” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “MAGNISEAL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “MAGNISEAL” in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “MAGNISEAL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once haMAGNISEAL” is very difficult to dislodge.Though “MAGNISEAL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“MAGNISEAL” is available in 25 kg packaging.Storage & Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“MAGNISEAL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 250 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE

a) Waterproof concrete Constructions like:Basements, swimming pools, water tanks,water containers and bridgesAggresion resistant concrete constructions, clarification plants, foundations, concrete construction in coastal areasConstructions exposed to aggressive weather conditions, towers, concrete roofs etc.b) Flooring and mosaic tilesc) Rendering and wall plastering

SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
MAGNISEAL SUPERIOR WATER PROOFING COATING 1 KG POUCH (GREY) (MAGNISEAL1KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO 250 SQ. FT. AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“ MAGNIISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“MAGNISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

“MAGNISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
“MAGNISEAL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “MAGNISEAL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “MAGNISEAL” or polymer modified mortar prior to coating the entire area prior to the application of “MAGNISEAL”.
Mixing proper and thorough mixing of the “MAGNISEAL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “MAGNISEAL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “MAGNISEAL ” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

“MAGNISEAL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“MAGNISEAL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “MAGNISEAL ” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “MAGNISEAL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “MAGNISEAL” in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “MAGNISEAL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once haMAGNISEAL” is very difficult to dislodge.Though “MAGNISEAL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“MAGNISEAL” is available in 25 kg packaging.Storage & Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“MAGNISEAL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 250 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE

a) Waterproof concrete Constructions like:Basements, swimming pools, water tanks,water containers and bridgesAggresion resistant concrete constructions, clarification plants, foundations, concrete construction in coastal areasConstructions exposed to aggressive weather conditions, towers, concrete roofs etc.b) Flooring and mosaic tilesc) Rendering and wall plastering

SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
MAGNIFIX GREY TILE ADHESIVE 25 KG BAG (MAGNIFIXGREY25kg)

 

MAGNICRETE - MAGNIFIX grey is high performance cement based, polymer modified, and flexible tile adhesive. It is fast setting, specially formulated and designed to suit Indian environmental conditions complying with EN 12004 Type C2F S1standard. It is suitable for a bed thickness of 3 – 6mm, interior and exterior floor and wall applications. While it is mainly used up to 6mm bed thickness, however it can be suitably used for a thickness up to 12mm.

MAGNICRETE - MAGNIFIX can be used for areas which are totally immersed in water e.g. swimming pools and wet rooms. The product is recommended for fixing ceramic, fully vitrified tiles, marble, granite, natural stone and mosaics to a variety of cementitious substrates including those subjects to minor movement/vibration.

MAGNICRETE - MAGNIFIX uses the thin bed tile fixing method for a faster, professional and lasting tile installation.

 

Features and Benefits:

  • “MAGNIFIX” is premixed and ready to use. Only water is to be added at site
  • It can be used for both Interior and Exterior application
  • High Tensile Adhesion strength resulting in higher grab and durability
  • Self-Curing and Sag Resistant
  • Effortless Mixing, Ease of Spread resulting in higher output
  • Greater workability due to long pot life and extended open time
  • For interior and exterior application
  • Ease of workability & higher coverage leads to higher productivity 

Sand used in the on-site mix is not graded like in factory mix tile adhesive, it's often much too coarse for a perfect mix. This makes it especially difficult to work with on walls, whereas Magnifix white and grey Tile Adhesive is formulated using fine grain sand of a specified caliber and it is free of silt and dirt.

NOTE: ORDER FOR MINIMUM QUANTITY 120 BAGS WILL BE ACCEPTED FOR SUPPLIES IN AJMER/ JAIPUR DISTRICTS. ORDER FOR OTHER DISTRICT WILL BE TAKEN ON MOQ 240 BAGS OR ABOVE ON THE BASIS OF COST OF LOGISTICS.

( GST EXTRA @ 18% ON PRICE + SHIPPING )
MAGNISILK(MF) 25 KG BAG LEVEL PLASTER MATT FINISH WALL PUTTY PRIMER FOR LEVELING OF PLUMB (MAGNISILK(MF)25KG)

MAGNICRETE - MAGNISILK - (MF) MATT FINISH FOR LEVEL PLASTER FOR PLUMB CORRECTION AS PRIMER FOR MAGNISILK FINAL FINISH SILKY WALL PUTTY 
Freedom from Flaking and Saving on Paint. “MAGNISILK" is a water-resistant white cement-based dry mix powder which provides a strong base on concrete and plaster both on Internal and External surfaces and ceilings. It is applied after plaster and before painting of the wall. It fills the fine pores of the walls and ceilings, thereby providing a white, smooth and dry surface for painting. Being water resistant it provides a protective base to surfaces which prevents expensive paint from flaking.

MAGNISILK has been formulated with specially designed best in class imported Polymers and Additives for providing more adhesive strength which provides a strong base, ensuring a longer life for the painted surface. It does not require water curing and it can even be applied on freshly plastered wall thus resulting in savings of time and cost. During repainting, the surface done up with "MAGNISILK" requires minimum scrubbing thus eliminating the mess of dust, which is a health hazard especially for asthmatic patients.

Generally Primer is not required after application of "MAGNISILK" before Painting which reduces the time and cost of the additional application process. If applied properly there is substantial increase in the coverage of paint due to "MAGNISILK" water resistance properties and high quality.

Its superior quality ensures that it meets the global standards of HDB, Singapore.


Suitable Substrates:

  • • Concrete Walls
  • • Slabs & Ceilings,
  • • Clay brick masonry
  • • Concrete Block Masonry
  • • Aerated Autoclaved Concrete Block masonry

Features and Benefits:

  • • Being a cementitious material, it has better adhesion and durability with the concrete and mortar walls.
  • • Doesn't need any kind of primer on it before application of paint / distemper thus saving time & cost.
  • • Can be applied on both interior and exterior surfaces
  • • Gives a smooth, white & glossy finish surface.
  • • Effectively reduces the consumption of subsequent Paints & gives true tone of colour.
  • • It is in dry powder form and does not produce any kind of unpleasant smell at the time of application.
  • • It is Eco-Friendly. It does not contain lead, oil or toxic material.
  • • No water curing is required after application thus saving time & cost.
  • • Is water resistant and can be applied on moist surfaces.
  • • Accepts any kind of paint or distemper application on it.
  • • Can be applied on used surface after proper preparation.
  • • It prevents the growth of algae and fungi on walls.
  • • Silky finish to walls/ surfaces
GST 18% EXTRA ON PRICE+SHIPPING
MAGNICOOL SUPERIOR ANTI HEAT WATER PROOFING COATING 25 KG BAG (WHITE) (MAGNICOOL25KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO  8-10 SQ FT PER KG  AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“ MAGNIICOOL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“MAGNIICOOL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

MAGNIICOOL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
MAGNIICOOL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “MAGNIICOOL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “MAGNIICOOL” or polymer modified mortar prior to coating the entire area prior to the application of “MAGNIICOOL”.
Mixing proper and thorough mixing of the “MAGNIICOOL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “MAGNIICOOL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “MAGNIICOOL ” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

MAGNIICOOL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“MAGNIICOOL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “MAGNIICOOL” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “MAGNIICOOL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “MAGNIICOOL" in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “MAGNIICOOL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once ha"MAGNIICOOL” is very difficult to dislodge.Though “MAGNIICOOL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“MAGNISEAL” is available in 25 kg packaging.Storage & Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“MAGNIICOOL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 250 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE

a) Waterproof concrete Constructions like:Basements, swimming pools, water tanks,water containers and bridges Aggresion resistant concrete constructions, clarification plants, foundations, concrete construction in coastal areas Constructions exposed to aggressive weather conditions, towers, concrete roofs etc.b) Flooring and mosaic tilesc) Rendering and wall plastering

SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND GST INCLUSIVE @ 18%
MAGNICOOL SUPERIOR ANTI HEAT WATER PROOFING COATING ONE (1) KG POUCH (WHITE) (MAGNICOOL1KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO  8-10 SQ FT PER KG  AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“ MAGNIICOOL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“MAGNIICOOL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

MAGNIICOOL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
MAGNIICOOL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “MAGNIICOOL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “MAGNIICOOL” or polymer modified mortar prior to coating the entire area prior to the application of “MAGNIICOOL”.
Mixing proper and thorough mixing of the “MAGNIICOOL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “MAGNIICOOL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “MAGNIICOOL ” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

MAGNIICOOL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“MAGNIICOOL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “MAGNIICOOL” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “MAGNIICOOL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “MAGNIICOOL" in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “MAGNIICOOL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once ha"MAGNIICOOL” is very difficult to dislodge.Though “MAGNIICOOL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“MAGNISEAL” is available in 25 kg packaging.Storage & Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“MAGNIICOOL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 250 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE

a) Waterproof concrete Constructions like:Basements, swimming pools, water tanks,water containers and bridges Aggresion resistant concrete constructions, clarification plants, foundations, concrete construction in coastal areas Constructions exposed to aggressive weather conditions, towers, concrete roofs etc.b) Flooring and mosaic tilesc) Rendering and wall plastering

COOL ROOFS ANTI HEAT SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND GST INCLUSIVE SHIPPING FREE
MAGNISILK 5 KG POUCH SUPERIOR WALL PUTTY FOR SILKY FINISH (MAGNISILK5KG)

MAGNICRETE - MAGNISILK - for Silky Finish Walls – Freedom from Flaking and Saving on Paint. “MAGNISILK" is a water-resistant white cement-based dry mix powder which provides a strong base on concrete and plaster both on Internal and External surfaces and ceilings. It is applied after plaster and before painting of the wall. It fills the fine pores of the walls and ceilings, thereby providing a white, smooth and dry surface for painting. Being water resistant it provides a protective base to surfaces which prevents expensive paint from flaking.

MAGNISILK has been formulated with specially designed best in class imported Polymers and Additives for providing more adhesive strength which provides a strong base, ensuring a longer life for the painted surface. It does not require water curing and it can even be applied on freshly plastered wall thus resulting in savings of time and cost. During repainting, the surface done up with "MAGNISILK" requires minimum scrubbing thus eliminating the mess of dust, which is a health hazard especially for asthmatic patients.

Generally Primer is not required after application of "MAGNISILK" before Painting which reduces the time and cost of the additional application process. If applied properly there is substantial increase in the coverage of paint due to "MAGNISILK" water resistance properties and high quality.

Its superior quality ensures that it meets the global standards of HDB, Singapore.


Suitable Substrates:

  • • Concrete Walls
  • • Slabs & Ceilings,
  • • Clay brick masonry
  • • Concrete Block Masonry
  • • Aerated Autoclaved Concrete Block masonry

Features and Benefits:

  • • Being a cementitious material, it has better adhesion and durability with the concrete and mortar walls.
  • • Doesn't need any kind of primer on it before application of paint / distemper thus saving time & cost.
  • • Can be applied on both interior and exterior surfaces
  • • Gives a smooth, white & glossy finish surface.
  • • Effectively reduces the consumption of subsequent Paints & gives true tone of colour.
  • • It is in dry powder form and does not produce any kind of unpleasant smell at the time of application.
  • • It is Eco-Friendly. It does not contain lead, oil or toxic material.
  • • No water curing is required after application thus saving time & cost.
  • • Is water resistant and can be applied on moist surfaces.
  • • Accepts any kind of paint or distemper application on it.
  • • Can be applied on used surface after proper preparation.
  • • It prevents the growth of algae and fungi on walls.
  • • Silky finish to walls/ surfaces
GST 18% EXTRA
MAGNIFIX SUPER WHITE TILE ADHESIVE 25 KG BAG (MAGNIFIX25kg)

 

MAGNICRETE - MAGNIFIX is high performance cement based, polymer modified, and flexible tile adhesive. It is fast setting, specially formulated and designed to suit Indian environmental conditions complying with EN 12004 Type C2F S1standard. It is suitable for a bed thickness of 3 – 6mm, interior and exterior floor and wall applications. While it is mainly used up to 6mm bed thickness, however it can be suitably used for a thickness up to 12mm.

MAGNICRETE - MAGNIFIX can be used for areas which are totally immersed in water e.g. swimming pools and wet rooms. The product is recommended for fixing ceramic, fully vitrified tiles, marble, granite, natural stone and mosaics to a variety of cementitious substrates including those subjects to minor movement/vibration.

MAGNICRETE - MAGNIFIX uses the thin bed tile fixing method for a faster, professional and lasting tile installation.

 

Features and Benefits:

  • “MAGNIFIX” is premixed and ready to use. Only water is to be added at site
  • It can be used for both Interior and Exterior application
  • High Tensile Adhesion strength resulting in higher grab and durability
  • Self-Curing and Sag Resistant
  • Effortless Mixing, Ease of Spread resulting in higher output
  • Greater workability due to long pot life and extended open time
  • For interior and exterior application
  • Ease of workability & higher coverage leads to higher productivity 

Sand used in the on-site mix is not graded like in factory mix tile adhesive, it's often much too coarse for a perfect mix. This makes it especially difficult to work with on walls, whereas Magnifix white and grey Tile Adhesive is formulated using fine grain sand of a specified caliber and it is free of silt and dirt.

NOTE: ORDER FOR MINIMUM QUANTITY 120 BAGS WILL BE ACCEPTED FOR SUPPLIES IN AJMER/ JAIPUR DISTRICTS. ORDER FOR OTHER DISTRICT WILL BE TAKEN ON MOQ 240 BAGS OR ABOVE ON THE BASIS OF COST OF LOGISTICS.

( GST EXTRA @ 18% ON PRICE + SHIPPING )
MAGNISEAL SUPERIOR WATER PROOFING COATING 25 KG BAG (GREY) (MAGNISEAL25KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO 250 SQ. FT. AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“ MAGNIISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“MAGNISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

“MAGNISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
“MAGNISEAL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “MAGNISEAL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “MAGNISEAL” or polymer modified mortar prior to coating the entire area prior to the application of “MAGNISEAL”.
Mixing proper and thorough mixing of the “MAGNISEAL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “MAGNISEAL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “MAGNISEAL ” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

“MAGNISEAL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“MAGNISEAL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “MAGNISEAL ” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “MAGNISEAL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “MAGNISEAL” in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “MAGNISEAL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once haMAGNISEAL” is very difficult to dislodge.Though “MAGNISEAL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“MAGNISEAL” is available in 25 kg packaging.Storage & Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“MAGNISEAL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 250 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE

a) Waterproof concrete Constructions like: Basements, swimming pools, water tanks,water containers and bridges Aggresion resistant concrete constructions, clarification plants, foundations, concrete construction in coastal areas Constructions exposed to aggressive weather conditions, towers, concrete roofs etc. b) Flooring and mosaic tiles c) Rendering and wall plastering

SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
MAGNICOOL SUPERIOR ANTI HEAT WATER PROOFING COATING 5 KG POUCH (WHITE) (MAGNICOOL5KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO  8-10 SQ FT PER KG  AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“ MAGNIICOOL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“MAGNIICOOL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

MAGNIICOOL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
MAGNIICOOL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “MAGNIICOOL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “MAGNIICOOL” or polymer modified mortar prior to coating the entire area prior to the application of “MAGNIICOOL”.
Mixing proper and thorough mixing of the “MAGNIICOOL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “MAGNIICOOL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “MAGNIICOOL ” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

MAGNIICOOL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“MAGNIICOOL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “MAGNIICOOL” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “MAGNIICOOL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “MAGNIICOOL" in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “MAGNIICOOL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once ha"MAGNIICOOL” is very difficult to dislodge.Though “MAGNIICOOL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“MAGNISEAL” is available in 25 kg packaging.Storage & Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“MAGNIICOOL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 250 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE

a) Waterproof concrete Constructions like:Basements, swimming pools, water tanks,water containers and bridges Aggresion resistant concrete constructions, clarification plants, foundations, concrete construction in coastal areas Constructions exposed to aggressive weather conditions, towers, concrete roofs etc.b) Flooring and mosaic tilesc) Rendering and wall plastering

COOL ROOF SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND GST INCLUSIVE @ 18% SHIPPING FREE
MAGNIJOINT THIN JOINTING MORTAR FOR AAC BLOCKS 25 KG BAG (MAGNIJOINT25KG)
MAGNICRETE - MAGNIJOINT is a ready to use, polymer modified high strength thin jointing mortar for laying AAC blocks, fly ash bricks, concrete blocks etc. It is the preferred choice for building masonry units where the joint thickness is reduced from 12~18 mm in conventional application and optimized to 3 mm, improving the quality of construction many folds. Thin-Joint blockwork enables wall masonry to be built very quickly without having to wait the conventional 24 hours for the mortar to set before further loading can be applied. MAGNIJOINT starts to set within 5 minutes of application and approaches full design strength in just 1 to 2 hours. This enables blockwork to be built extremely quickly. MAGNIJOINT is easily mixed on site by adding the appropriate quantities of water. It is applied with a proprietary scoop or Notch Trowel, which will create a consistent joint thickness of 3 mm. MAGNIJOINT application is best suited for Aerated Autoclave blocks (AAC Blocks), Cement Mortar Blocks, Bricks, Cellular/ Solid concrete blocks and Fly Ash Bricks. For Clay Bricks Thick Bed Jointing Mortar is available on demand. Areas of Application: • Laying and jointing of fly ash bricks, cement block,hollow blocks, AAC block etc.• Jointing of pre-stressed concrete slabs, panels.• Parapet walls• Jointing of cement window and door frames.• Garden and boundary walls. Features and Benefits: • Magnijoint is Pre-mixed and ready to use. Only water is to be added at site. • Economical. Ease of mix and much faster to apply and thus Eliminates lengthy and cumbersome inaccurate process of site mixing. • Transport and storage of all individual materials in Site Mixing is avoided. • Thin layer application results in structure being compact. • No water curing is required after application. • Highly water resistant and hence chances of water percolation is negligible. • High Bond Strength: Special polymers imparts high adhesion strength increasing the durability of masonry. • No Shrinkage Cracks: Water retention properties reduces the shrinkage cracks. • High Thermal Insulation: Thin joint prevent transfer through walls. • Ease of mixing and application of the mortar. • Higher tensile strength between masonry blocks. • Negligible Wastage & Higher Coverage. • 3 mm joint thickness leads to faster and economical application. • Eco friendly product. Raw materials are processed, reducing the chances of Efflorescence. • Reduces the thickness of subsequent application. “MAGNIPLAST” can be applied as low as 6-12 mm with all the properties and durability
SINGLE COMPONENT POLYMERIZED JOINTING MORTAR GST INCLUSIVE @ 18% FREE SHIPPING AT JAIPUR /AJMER / KISHANGARH / NASIRABAD ONLY ON MOQ 36 BAGS (WITHIN 15 KMS FROM WAREHOUSE )
Per Page      1 - 12 of 12