DOLPHIN

DOLPHIN NO KRACK SYNTHETIC FIBERS FOR CONSTRUCTION / WATERPROOFING, PAVER BLOCKS,PLASTER, POP, FALSE CEILINGS,RCC BLOCKS, COVER BLOCKS
Sort By:  
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE, सीमेंट कोई भी, माइक्रो फाइबर हमारा
Add to Cart
₹38
USE IN RCC,PCC, CC, PATCH REPAIR, COLUMN/BEAMS/SLABS TO MAKE IT REAL IMPERMIABLE 900 GMS PACK , TO BE USED 0.9 KG/M3...........GST EXTRA @18%............FREE SHIPPING PAN INDIA UPTO DISTRICT PLACES
Add to Cart
₹305
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE, सीमेंट कोई भी, माइक्रो फाइबर हमारा
Add to Cart
₹47
600 GMS PACK , TO BE USED 0.9 KG/M3...........GST EXTRA @18%............FREE SHIPPING PAN INDIA UPTO DISTRICT PLACES
Add to Cart
₹212
MICRO FIBER 12 MM 125 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE12MM125GMS)
SPECIFICATION of POLYPROPYLENE FIBRE. Physical : Appearance : White Fibres Specific Gravity : 0.91 Melting Point : 165 C Diameter : 30-35 Micron Length : 12mm Absorbency : < 0.1%. Chemical : Resistance to Acids : Excellent Resistance to Alkalies : Excellent Resistance to Oxidising Agents : Good Resistance to Reducing Agents : Good Resistance to Organic Solvent : Good. Biological Resistance : High / Non bio-degradable. Compatibility with Cements : Excellent Polypropylene Microfiber is a synthetic fibre for concrete, manufactured from 100% virgin polypropylene in a monofilament form. Polypropylene Microfiber is produced on a state-of-the-art production line which is specifically designed to yield an ultra thin concrete reinforcing fibre. 600g of Polypropylene Microfiber contains approximately 135 million individual fibres. Engineered specifically for use in concrete, it is alkali-resistant, non-absorptive and completely non-corrosive. Polypropylene Microfiber provides secondary reinforcement and protects concrete from stresses which cause cracking while the concrete is most vulnerable — during the first 24 hours after placement. Polypropylene Microfiber complies with European Standard BS EN 14889-2:2006 and ASTM Designation C 1116 Standard Specification for Fibre Reinforced Concrete and Shotcrete, Type III Synthetic Fibre-Reinforced Concrete or Shotcrete. Polypropylene Microfiber is available in 12mm or 19mm in length. It is also available in 6mm length for mortar mixes, to be used in plastering, screeding and patching. Applications Polypropylene Microfiber may be used in any application where the following benefits are desired: •Decreased plastic shrinkage and cracking •Improved concrete durability •Increased fire resistance to explosive spalling •As secondary reinforcement for crack protection and control •Where extended finishing operations are required •Where reduced use/ non-use of welded wire fabric is needed Specifically applications include, but are not limited to, slabs on grade, elevated slabs, pavements, overlays, sloped walls, pools, Shotcrete, stucco, precast and pre-stressed concrete products. Polypropylene Microfiber is not recommended to increase joint spacing or as a substitute for any reinforcement required by the Model Building Codes and Standards. Advantages Polypropylene Microfiber uniformly distributes multi-dimensionally throughout the concrete mixture. The extremely high number of fibres in the fresh concrete matrix provides a high degree of secondary reinforcement. This reinforcement reduces the formation of all types of early cracking, protecting the concrete when its tensile strength is lowest. This cracking caused by plastic shrinkage, settlement, and other internal stresses would otherwise permanently weaken the resulting concrete. The concrete permeability is decreased, while surface characteristics, impact, and toughness properties are improved. Typical Properties Specific Gravity 0.91 Absorption None Modulus of Elasticity 500 ksi Melt Point 160ºC Ignition Point 590ºC Alkali, Acid and Salt Resistance High Technically advanced production techniques make Polypropylene Microfiber a highly durable fibre that is virtually invisible in fresh and hardened concrete. This minimises fibre-reinforced concrete finishing concerns while providing the highest level of crack protection available. Mixing Requirements and Addition Rates Polypropylene Microfiber may be added to concrete at any point during the batching or mixing process. Polypropylene Microfiber may be added to the aggregate during weighing or charging, or to the central mixer or truck before, during, or after charging. The concrete must be mixed at high speed for 5 minutes, or 70 revolutions, after the addition of Polypropylene Microfiber to ensure uniform distribution. The standard range of addition for Polypropylene Microfiber is 300 to 1,800g / m3 of concrete. Typically 600g / m3 of Polypropylene Microfiber provides excellent results. Higher addition rates may be used when special properties are required. Compatibility with Other Admixtures Polypropylene Microfiber is compatible with all GCP admixtures. Its action in concrete is purely mechanical and will not affect the hydration process. Each admixture should be added separately References American Concrete Institute (ACI): ACI 544.1 R “State of the Art Report of Fibre Reinforced Concrete” ACI 302 “Guide for Concrete Floor and Slab Construction” American Society of Testing and Materials (ASTM): ASTM C 1116 “Standard Specification for Fibre-Reinforced Concrete and Shotcrete” ASTM C 94 “Standard Specification for Ready-Mixed Concrete” European Standard: BS EN 14889-2:2006 Fibres for Concrete – Part 2: Polymer fibres – Definitions, specifications and conformity Fibre geometry (l = 50 mm) Mechanical anchorage type Cross-section b × h [mm] Interfacial bond strength τb [MPa] τb /τb,straight Straight 1.4 × 0.7 0.28 1.00 Crimped 1.4 × 0.7 1.82 6.50 Twisted 2.0 × 0.7 0.56 2.00 Enlarged ends Diameters: 1.0; 3.0 0.71 2.54 Sinusoidal ends 1.4 × 0.7 0.72 2.57 Hooked 1.4 × 0.7 0.40 1.43 Double duoform 1.4 × 0.7; 2.0 × 0.7 1.10 3.93
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE
Add to Cart
₹44
MICRO FIBER 6 MM 100 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE6MM100GMS)
SPECIFICATION of POLYPROPYLENE FIBRE. Physical : Appearance : White Fibres Specific Gravity : 0.91 Melting Point : 165 C Diameter : 30-35 Micron Length : 06mm Absorbency : < 0.1%. Chemical : Resistance to Acids : Excellent Resistance to Alkalies : Excellent Resistance to Oxidising Agents : Good Resistance to Reducing Agents : Good Resistance to Organic Solvent : Good. Biological Resistance : High / Non bio-degradable. Compatibility with Cements : Excellent Polypropylene Microfiber is a synthetic fibre for concrete, manufactured from 100% virgin polypropylene in a monofilament form. Polypropylene Microfiber is produced on a state-of-the-art production line which is specifically designed to yield an ultra thin concrete reinforcing fibre. 600g of Polypropylene Microfiber contains approximately 135 million individual fibres. Engineered specifically for use in concrete, it is alkali-resistant, non-absorptive and completely non-corrosive. Polypropylene Microfiber provides secondary reinforcement and protects concrete from stresses which cause cracking while the concrete is most vulnerable — during the first 24 hours after placement. Polypropylene Microfiber complies with European Standard BS EN 14889-2:2006 and ASTM Designation C 1116 Standard Specification for Fibre Reinforced Concrete and Shotcrete, Type III Synthetic Fibre-Reinforced Concrete or Shotcrete. Polypropylene Microfiber is available in 12mm or 19mm in length. It is also available in 6mm length for mortar mixes, to be used in plastering, screeding and patching. Applications Polypropylene Microfiber may be used in any application where the following benefits are desired: •Decreased plastic shrinkage and cracking •Improved concrete durability •Increased fire resistance to explosive spalling •As secondary reinforcement for crack protection and control •Where extended finishing operations are required •Where reduced use/ non-use of welded wire fabric is needed Specifically applications include, but are not limited to, slabs on grade, elevated slabs, pavements, overlays, sloped walls, pools, Shotcrete, stucco, precast and pre-stressed concrete products. Polypropylene Microfiber is not recommended to increase joint spacing or as a substitute for any reinforcement required by the Model Building Codes and Standards. Advantages Polypropylene Microfiber uniformly distributes multi-dimensionally throughout the concrete mixture. The extremely high number of fibres in the fresh concrete matrix provides a high degree of secondary reinforcement. This reinforcement reduces the formation of all types of early cracking, protecting the concrete when its tensile strength is lowest. This cracking caused by plastic shrinkage, settlement, and other internal stresses would otherwise permanently weaken the resulting concrete. The concrete permeability is decreased, while surface characteristics, impact, and toughness properties are improved. Typical Properties Specific Gravity 0.91 Absorption None Modulus of Elasticity 500 ksi Melt Point 160ºC Ignition Point 590ºC Alkali, Acid and Salt Resistance High Technically advanced production techniques make Polypropylene Microfiber a highly durable fibre that is virtually invisible in fresh and hardened concrete. This minimises fibre-reinforced concrete finishing concerns while providing the highest level of crack protection available. Mixing Requirements and Addition Rates Polypropylene Microfiber may be added to concrete at any point during the batching or mixing process. Polypropylene Microfiber may be added to the aggregate during weighing or charging, or to the central mixer or truck before, during, or after charging. The concrete must be mixed at high speed for 5 minutes, or 70 revolutions, after the addition of Polypropylene Microfiber to ensure uniform distribution. The standard range of addition for Polypropylene Microfiber is 300 to 1,800g / m3 of concrete. Typically 600g / m3 of Polypropylene Microfiber provides excellent results. Higher addition rates may be used when special properties are required. Compatibility with Other Admixtures Polypropylene Microfiber is compatible with all GCP admixtures. Its action in concrete is purely mechanical and will not affect the hydration process. Each admixture should be added separately References American Concrete Institute (ACI): ACI 544.1 R “State of the Art Report of Fibre Reinforced Concrete” ACI 302 “Guide for Concrete Floor and Slab Construction” American Society of Testing and Materials (ASTM): ASTM C 1116 “Standard Specification for Fibre-Reinforced Concrete and Shotcrete” ASTM C 94 “Standard Specification for Ready-Mixed Concrete” European Standard: BS EN 14889-2:2006 Fibres for Concrete – Part 2: Polymer fibres – Definitions, specifications and conformity
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE, सीमेंट कोई भी, माइक्रो फाइबर हमारा
Add to Cart
₹38
MICRO FIBER 12 MM 100 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE12MM100GMS)
Product Details:ColorPure whiteSize/LengthSpecial blend of lengthsUsageWater retaining structures, effluent & sewage treatment plants, wet slabs (roof, toilets, etc.)Item Code: NOKRACKPP Fibres For Waterproofing Coating are our combination of Multifilament Straight Fibres + Fibrillated Mesh Fibres "NOKRACK" is chemically surface treated 100% Virgin high tenacity polypropylene fibre based concrete additive and is available in graded lengths for use in water retaining slabs / structures. It is available in multiples of 10 mm & 20 mm to give 3D micro-reinforcement. This is to be used as micro reinforcement at minimum of 0.9 kg/m3 of concrete. NOKRACK complies with ASTM C 1116 and ACI committee report 544-1R.The key actions of Nokrack are as follows:Increases water proofing ability of concrete (reduces permeability).Reduces need to do water proof plaster, pressure grouting.Reduces shrinkage and plastic cracking in concrete.Makes the concrete dense & strong.Protects steel.
Application of PP Fibres :
Roof slabs, wet slabs, toilet floor slabs, bathrooms, utility areas & kitchens.Water retaining structures.Effluent or sewage treatment tanks. Gunite & shotcrete. Ferrocrete tanks.Warehouse flooring.Rafts.Basement waterproofing.Overlays / toppings.Concrete Tanks
Properties of PP Fibres: Length : Multiples of 10/20 mm.Construction : Combination of straight + fibrillated mesh fibre.Melting Point : 165 Deg C.Absorption : Nil.Acid Resistance : High.Alkali Resistance : Completely resistant.Salt Resistance : High.Thermal Conductivity : Low.Electrical Conductivity : Low.Tenacity : 6.5 GPD.Elongation : 19% Important information for our buyers: Dosage: Minimum 0.9 kg /m3 of concrete or @ 125 g /50 kg bag of cement.Water Cement Ratio : NOKRACK is a physical micro-reinforcement and does not react chemically hence additional water is not required.Mixing Process: Mix directly in the concrete mixer @ 125 g /50 kg bag of cement or 0.9 kg/m3Note: Fibres should not be used for replacement of structural or load bearing reinforcement.
cement koi bhee, micro fiber hamara सीमेंट कोई भी, माइक्रो फाइबर हमारा Polypropylene Microfiber is a synthetic fibre for concrete, manufactured from 100% virgin polypropylene in a monofilament form. Polypropylene Microfiber is produced on a state-of-the-art production line which is specifically designed to yield an ultra thin concrete reinforcing fibre. 600g of Polypropylene Microfiber contains approximately 135 million individual fibres. Engineered specifically for use in concrete, it is alkali-resistant, non-absorptive and completely non-corrosive. Polypropylene Microfiber provides secondary reinforcement and protects concrete from stresses which cause cracking while the concrete is most vulnerable — during the first 24 hours after placement. Polypropylene Microfiber complies with European Standard BS EN 14889-2:2006 and ASTM Designation C 1116 Standard Specification for Fibre Reinforced Concrete and Shotcrete, Type III Synthetic Fibre-Reinforced Concrete or Shotcrete. Polypropylene Microfiber is available in 12mm or 19mm in length. It is also available in 6mm length for mortar mixes, to be used in plastering, screeding and patching. Applications Polypropylene Microfiber may be used in any application where the following benefits are desired: •Decreased plastic shrinkage and cracking •Improved concrete durability •Increased fire resistance to explosive spalling •As secondary reinforcement for crack protection and control •Where extended finishing operations are required •Where reduced use/ non-use of welded wire fabric is needed Specifically applications include, but are not limited to, slabs on grade, elevated slabs, pavements, overlays, sloped walls, pools, Shotcrete, stucco, precast and pre-stressed concrete products. Polypropylene Microfiber is not recommended to increase joint spacing or as a substitute for any reinforcement required by the Model Building Codes and Standards. Advantages Polypropylene Microfiber uniformly distributes multi-dimensionally throughout the concrete mixture. The extremely high number of fibres in the fresh concrete matrix provides a high degree of secondary reinforcement. This reinforcement reduces the formation of all types of early cracking, protecting the concrete when its tensile strength is lowest. This cracking caused by plastic shrinkage, settlement, and other internal stresses would otherwise permanently weaken the resulting concrete. The concrete permeability is decreased, while surface characteristics, impact, and toughness properties are improved. Typical Properties Specific Gravity 0.91 Absorption None Modulus of Elasticity 500 ksi Melt Point 160ºC Ignition Point 590ºC Alkali, Acid and Salt Resistance High Technically advanced production techniques make Polypropylene Microfiber a highly durable fibre that is virtually invisible in fresh and hardened concrete. This minimises fibre-reinforced concrete finishing concerns while providing the highest level of crack protection available. Mixing Requirements and Addition Rates Polypropylene Microfiber may be added to concrete at any point during the batching or mixing process. Polypropylene Microfiber may be added to the aggregate during weighing or charging, or to the central mixer or truck before, during, or after charging. The concrete must be mixed at high speed for 5 minutes, or 70 revolutions, after the addition of Polypropylene Microfiber to ensure uniform distribution. The standard range of addition for Polypropylene Microfiber is 300 to 1,800g / m3 of concrete. Typically 600g / m3 of Polypropylene Microfiber provides excellent results. Higher addition rates may be used when special properties are required. Compatibility with Other Admixtures Polypropylene Microfiber is compatible with all GCP admixtures. Its action in concrete is purely mechanical and will not affect the hydration process. Each admixture should be added separately References American Concrete Institute (ACI): ACI 544.1 R “State of the Art Report of Fibre Reinforced Concrete” ACI 302 “Guide for Concrete Floor and Slab Construction” American Society of Testing and Materials (ASTM): ASTM C 1116 “Standard Specification for Fibre-Reinforced Concrete and Shotcrete” ASTM C 94 “Standard Specification for Ready-Mixed Concrete” European Standard: BS EN 14889-2:2006 Fibres for Concrete – Part 2: Polymer fibres – Definitions, specifications and conformity
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE DOLPHIN NO-KRACK
Add to Cart
₹38
MICRO FIBER 12 MM 125 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE12MM125GMS)
SPECIFICATION of POLYPROPYLENE FIBRE. Physical : Appearance : White Fibres Specific Gravity : 0.91 Melting Point : 165 C Diameter : 30-35 Micron Length : 12mm Absorbency : < 0.1%. Chemical : Resistance to Acids : Excellent Resistance to Alkalies : Excellent Resistance to Oxidising Agents : Good Resistance to Reducing Agents : Good Resistance to Organic Solvent : Good. Biological Resistance : High / Non bio-degradable. Compatibility with Cements : Excellent
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE
Add to Cart
₹44
MICRO FIBER 6 MM 125 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE6MM125GMS)
Product Details:ColorPure whiteSize/LengthSpecial blend of lengthsUsageWater retaining structures, effluent & sewage treatment plants, wet slabs (roof, toilets, etc.)Item Code: NOKRACKPP Fibres For Waterproofing Coating are our combination of Multifilament Straight Fibres + Fibrillated Mesh Fibres "NOKRACK" is chemically surface treated 100% Virgin high tenacity polypropylene fibre based concrete additive and is available in graded lengths for use in water retaining slabs / structures. It is available in multiples of 10 mm & 20 mm to give 3D micro-reinforcement. This is to be used as micro reinforcement at minimum of 0.9 kg/m3 of concrete. NOKRACK complies with ASTM C 1116 and ACI committee report 544-1R.The key actions of Nokrack are as follows:Increases water proofing ability of concrete (reduces permeability).Reduces need to do water proof plaster, pressure grouting.Reduces shrinkage and plastic cracking in concrete.Makes the concrete dense & strong.Protects steel.
Application of PP Fibres :
Roof slabs, wet slabs, toilet floor slabs, bathrooms, utility areas & kitchens.Water retaining structures.Effluent or sewage treatment tanks. Gunite & shotcrete. Ferrocrete tanks.Warehouse flooring.Rafts.Basement waterproofing.Overlays / toppings.Concrete Tanks
Properties of PP Fibres: Length : Multiples of 10/20 mm.Construction : Combination of straight + fibrillated mesh fibre.Melting Point : 165 Deg C.Absorption : Nil.Acid Resistance : High.Alkali Resistance : Completely resistant.Salt Resistance : High.Thermal Conductivity : Low.Electrical Conductivity : Low.Tenacity : 6.5 GPD.Elongation : 19% Important information for our buyers: Dosage: Minimum 0.9 kg /m3 of concrete or @ 125 g /50 kg bag of cement.Water Cement Ratio : NOKRACK is a physical micro-reinforcement and does not react chemically hence additional water is not required.Mixing Process: Mix directly in the concrete mixer @ 125 g /50 kg bag of cement or 0.9 kg/m3Note: Fibres should not be used for replacement of structural or load bearing reinforcement.सीमेंट कोई भी, माइक्रो फाइबर हमारा-MICROFIBER-MICROFIBRE-perma

Fibre reinforced concrete is a recent material well fitted for applications in industrial floors on soil foundation. The cost of fibers is compensated by a faster construction process and a reduction in the number of expansion joints. The Fibres Mainly used are Steel Fibres, Polypropylene (PP) Fibres & Cellulose Fibres. The fatigue, impact and flexural strength are significantly improved when steel fibers are added to the concrete mix. Industrial floors are the type of structures wherein the application of steel fiber reinforced concrete (SFRC) is advantageous. During the service life these structures are subjected to cyclic and impact loads, requiring an adequate fatigue flexural strength and energy absorption capacity.

Types:

Mainly three types –

  1. SFRC – Steel Fibre Reinforced Concrete
  2. Synthetic Fibres Reinforced Concrete
  3. Natural Fibres Reinforced Concrete

Advantages

Building a slab with FRC will have the following advantages:

  • Faster & cheaper construction (From 10-30% less usually)
  • Slab less thick so less concrete
  • No wire mesh installation and less people needed
  • Faster concrete pouring, especially with laser screed equipment
  • It is possible to do more than one surface in one day
  • It is possible to reduce number of saw-cuts
  • Lesser joint spacing
  • Cleaner, sharper edges
  • Less maintenance of the slab (less cracks, less saw-cuts, better fatigue and impact resistance, etc.
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE, cement koi bhee microfiber hamaaraa
Add to Cart
₹47
STRONGCRETE SYNTHETIC FIBERS 12 MM FOR CONCRETE ADDITIVES - EASILY DISPERSIBLE IN CONCRETE (STRONGCRETE900G)
STRONGCRETE® Synthetic Fibers Geo synthetic Fibrillated Mesh Fiber Based Concrete Additives in Graded Lengths with Chemical Surface Treatment for easy dispersion in concrete Geo synthetic Fibers based on 100% Virgin high tenacity fibrillated polypropylene mesh fibers with chemical treatment to the surface for uniform dispersion in wet concrete. This is available in graded lengths to give 3D micro-reinforcement. This is to be used as micro-reinforcement at optimum of 0.9 kg to 1.8 kg/ m3 of concrete. STRONGCRETE Complies With ASTM C 1116, ACI committee report 544-1R, European Standard EN 14889 – 2 : 2006, Fibers for concrete Part 2: Class 1b. IS:456-2000Guidelines for Concrete Amendment Aug. 2007 Function: • Reinforcement against shrinkage and intrinsic cracking • Replaces welded wire mesh / secondary crack control steel used for crack prevention of concrete floorings. • Reduces bleeding and dust formation in concrete. • Improves impact resistance 3-4 times. • Improves abrasion resistance by 30-40% • Gives residual strength to concrete. • Improves residual strength of concrete – thus avoids sudden failures and makes the concrete earth-quake resistant. • Reduces permeability, thus protects rebar from corrosion. • Makes the concrete more durable. • Makes hardened concrete more tough. Areas of Application: Industrial Flooring, Warehouse Flooring, Concrete Roads, RCC Beams, RCC Columns, RCC Slabs Bridge Decks Driveways Overlays Toppings Concrete Tanks Precast Shotcrete, Basement Waterproofing And all types of concrete, where toughness is required along with elimination of shrinkage cracks and other parameters mentioned earlier. Properties: Length: Graded, Construction: Fibrillated Melting Point: 1650C Absorption: Nil, Acid Resistance: High Alkali Resistance: Full Salt Resistance: High Thermal Conductivity: Low Sp. Gravity: 0.92 g/cc Elec. Conductivity: Low Tenacity: 4-5.5 GPD Elongation: 12-15% Dosage: Optimum dosage is 0.9 kg / m3 of concrete. Mix Design: STRONGCRETE is physical micro-reinforcement hence additional water is not required. Mixing Process: Mix directly in the concrete mixer @ 125 g / 50 kg bag of cement or 900 g/m3 Note: Fibers based additives is a micro-reinforcement and should not be used for replacement of structural or load bearing reinforcement.
USE IN RCC,PCC, CC, PATCH REPAIR, COLUMN/BEAMS/SLABS TO MAKE IT REAL IMPERMIABLE 900 GMS PACK , TO BE USED 0.9 KG/M3...........GST EXTRA @18%............FREE SHIPPING PAN INDIA UPTO DISTRICT PLACES
Add to Cart
₹305
MICRO FIBER 6 MM 125 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE6MM125GMS)
SPECIFICATION of POLYPROPYLENE FIBRE. Physical : Appearance : White Fibres Specific Gravity : 0.91 Melting Point : 165 C Diameter : 30-35 Micron Length : 06mm Absorbency : < 0.1%. Chemical : Resistance to Acids : Excellent Resistance to Alkalies : Excellent Resistance to Oxidising Agents : Good Resistance to Reducing Agents : Good Resistance to Organic Solvent : Good. Biological Resistance : High / Non bio-degradable. Compatibility with Cements : Excellent
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE, सीमेंट कोई भी, माइक्रो फाइबर हमारा
Add to Cart
₹47
STRONGCRETE SYNTHETIC FIBERS FOR CONCRETE ADDITIVES - EASILY DISPERSIBLE IN CONCRETE (STRONGCRETE600G)
STRONGCRETE® Synthetic Fibers Geo synthetic Fibrillated Mesh Fiber Based Concrete Additives in Graded Lengths with Chemical Surface Treatment for easy dispersion in concrete Geo synthetic Fibers based on 100% Virgin high tenacity fibrillated polypropylene mesh fibers with chemical treatment to the surface for uniform dispersion in wet concrete. This is available in graded lengths to give 3D micro-reinforcement. This is to be used as micro-reinforcement at optimum of 0.9 kg to 1.8 kg/ m3 of concrete. STRONGCRETE Complies With ASTM C 1116, ACI committee report 544-1R, European Standard EN 14889 – 2 : 2006, Fibers for concrete Part 2: Class 1b. IS:456-2000Guidelines for Concrete Amendment Aug. 2007 Function: • Reinforcement against shrinkage and intrinsic cracking • Replaces welded wire mesh / secondary crack control steel used for crack prevention of concrete floorings. • Reduces bleeding and dust formation in concrete. • Improves impact resistance 3-4 times. • Improves abrasion resistance by 30-40% • Gives residual strength to concrete. • Improves residual strength of concrete – thus avoids sudden failures and makes the concrete earth-quake resistant. • Reduces permeability, thus protects rebar from corrosion. • Makes the concrete more durable. • Makes hardened concrete more tough. Areas of Application: Industrial Flooring, Warehouse Flooring, Concrete Roads, RCC Beams, RCC Columns, RCC Slabs Bridge Decks Driveways Overlays Toppings Concrete Tanks Precast Shotcrete, Basement Waterproofing And all types of concrete, where toughness is required along with elimination of shrinkage cracks and other parameters mentioned earlier. Properties: Length: Graded, Construction: Fibrillated Melting Point: 1650C Absorption: Nil, Acid Resistance: High Alkali Resistance: Full Salt Resistance: High Thermal Conductivity: Low Sp. Gravity: 0.92 g/cc Elec. Conductivity: Low Tenacity: 4-5.5 GPD Elongation: 12-15% Dosage: Optimum dosage is 0.9 kg / m3 of concrete. Mix Design: STRONGCRETE is physical micro-reinforcement hence additional water is not required. Mixing Process: Mix directly in the concrete mixer @ 125 g / 50 kg bag of cement or 900 g/m3 Note: Fibers based additives is a micro-reinforcement and should not be used for replacement of structural or load bearing reinforcement.
600 GMS PACK , TO BE USED 0.9 KG/M3...........GST EXTRA @18%............FREE SHIPPING PAN INDIA UPTO DISTRICT PLACES
Add to Cart
₹212
STRONGCRETE MICROFIBER 12 MM 100 GMS PACK FOR CONCRETE ADDITIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE12MM100GMS)
Product Details:
Minimum Order Quantity 05 Kilogram
Size/Length Mixed lengths 12 mm
Usage Concrete additive - Roads, Slabs, Pavements, etc.
Color: Pure white 

Item Code:

STRONGCRETE Fibrillated Mesh Fibres (STRONGCRETE) is a chemically surface treated 100% Virgin high tenacity fibrillated polypropylene mesh fibre based concrete additive and is available in graded lengths.
It provides 3D micro-reinforcement to concretes.
It is used @ 0.9 kg per m3 of concrete (minimum). STRONGCRETE complies with ASTM C 1116 and ACI committee report 544-1R.The key actions of Fibrillated Mesh Fibres are as follows:Reinforcement against shrinkage and intrinsic cracking.Replaces welded wire mesh / secondary crack control steel used for crack prevention of concrete floorings.Reduces bleeding and dust formation in concrete.Improves impact resistance 3-4 times.Improves abrasion resistance by 30-40%.Gives residual strength to concrete thereby helping reduce sudden failures. This is a desirable characteristic of concrete in areas prone to earthquakes.Reduces permeability, thus reducing water ingress and protects reinforcement steel from corrosion.Makes the concrete more durable & tougher.Application of Fibrillated Mesh Fibres :Industrial Flooring.Warehouse Flooring.Concrete Roads.RCC Beams, Columns & Slabs.Bridge Decks.Driveways.Overlays Toppings.Concrete Tanks.Basement Waterproofing.All types of concrete, where toughness is required along with elimination of shrinkage cracks and other desirable characteristics as mentioned above.Properties of Fibrillated Mesh Fibres :Length : GradedConstruction : FibrillatedMelting Point : 165 Deg CAbsorption : NilAcid Resistance : HighAlkali Resistance : FullSalt Resistance : HighThermal Conductivity : LowElectrical Conductivity : LowTenacity : 5.5 GPDElongation : 15%Important information for our buyers:Dosage: Minimum 0.9 kg /m3 of concrete.Water Cement Ratio :
STRONGCRETE is a physical micro-reinforcement and does not react chemically hence additional water is not required.Mixing Process: Mix directly in the concrete mixer @ 125 g /50 kg bag of cement or 0.9 kg/m3.
Note: Fibres should not be used for replacement of structural or load bearing reinforcement.
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE
Add to Cart
₹44
MICROFIBER 6 MM 100 GMS PACK FOR CONCRETE ADDETIVE WATER DISPERCIBLE सीमेंट कोई भी, माइक्रो फाइबर हमारा (PPFIBRE6MM100GMS)
Product Details:ColorPure whiteSize/LengthSpecial blend of lengthsUsageWater retaining structures, effluent & sewage treatment plants, wet slabs (roof, toilets, etc.)Item Code: NOKRACKPP Fibres For Waterproofing Coating are our combination of Multifilament Straight Fibres + Fibrillated Mesh Fibres "NOKRACK" is chemically surface treated 100% Virgin high tenacity polypropylene fibre based concrete additive and is available in graded lengths for use in water retaining slabs / structures. It is available in multiples of 10 mm & 20 mm to give 3D micro-reinforcement. This is to be used as micro reinforcement at minimum of 0.9 kg/m3 of concrete. NOKRACK complies with ASTM C 1116 and ACI committee report 544-1R.The key actions of Nokrack are as follows:Increases water proofing ability of concrete (reduces permeability).Reduces need to do water proof plaster, pressure grouting.Reduces shrinkage and plastic cracking in concrete.Makes the concrete dense & strong.Protects steel.
Application of PP Fibres :
Roof slabs, wet slabs, toilet floor slabs, bathrooms, utility areas & kitchens.Water retaining structures.Effluent or sewage treatment tanks. Gunite & shotcrete. Ferrocrete tanks.Warehouse flooring.Rafts.Basement waterproofing.Overlays / toppings.Concrete Tanks
Properties of PP Fibres: Length : Multiples of 10/20 mm.Construction : Combination of straight + fibrillated mesh fibre.Melting Point : 165 Deg C.Absorption : Nil.Acid Resistance : High.Alkali Resistance : Completely resistant.Salt Resistance : High.Thermal Conductivity : Low.Electrical Conductivity : Low.Tenacity : 6.5 GPD.Elongation : 19% Important information for our buyers: Dosage: Minimum 0.9 kg /m3 of concrete or @ 125 g /50 kg bag of cement.Water Cement Ratio : NOKRACK is a physical micro-reinforcement and does not react chemically hence additional water is not required.Mixing Process: Mix directly in the concrete mixer @ 125 g /50 kg bag of cement or 0.9 kg/m3Note: Fibres should not be used for replacement of structural or load bearing reinforcement.MICROFIBRE-MICROFIBER
SHIPPING AND GST 18% EXTRA , CEMENT ADMIXTURE
Add to Cart
₹38
Per Page      1 - 10 of 10