SOLUTIONS

Sort By:  
A miracle device for water heating purpose at 20-25% energy v/s elec. gysers, even cheaper than solar water heating (HEAT PUMP BASED TECHNOLOGY) GST 18% EXTRA ON PRICE+SHIPPING
Call To Order  
₹125,000
for use in front facade, decking for swimming pools,ferries,yatch,ships,beach houses etc and filler of building entrance and outdoor gates.
Add to Cart
₹1,425
Garbage Disposals for Every Home & Budget
Call To Order  
₹28,000
Size:25mm A PRODUCT OF KISAN MOULDINGS LIMITED
Add to Cart
₹47
Size:25 X 15mm A PRODUCT OF KISAN MOULDINGS LIMITED MALE THREAD ADOPTER
Add to Cart
₹134
SIZE 4 X 2.5" SINGLE PATAM SIZES CAN BE AVAILABLE 2.5,3,3.5,4,5,6,7,8,9,10-15 FT OR CUSTOM SIZE OF CUSTOMERS REQUIREMENT
Add to Cart
₹237
5%ON PRICE+SHIPPING EXTRA (IF PURCHASED WITH SOLAR PENAL AND PCU), ORDERS ACCEPTED FOR RAJASTHAN STATE ONLY
AAV BLOCK 625X200X200MM
Autoclaved Aerated Concrete Light Weight AAC Blocks (A miraculous walling material ) replacement of red clay bricks. GST12% EXTRA ON PRICE+SHIPPING
Add to Cart
₹29
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
Add to Cart
₹280
CAN BE MADE AVAILABLE IN 10000 LTR TO 50 LAKH LTR
PROFESIONAL HEAVY DUTY,BRASS VALVE STEM,SPRAY HOT OR COLD LIQUIDS,INSTANT ON OFF 12% GST EXTRA SHIPPING FREE gardening,kitchen gardening, water saving car washing, masonry watering,tarai etc.construction activities
Add to Cart
₹550
Size:15mm A PRODUCT OF KISAN MOULDINGS LIMITED
Add to Cart
₹40
SIZE 8 X 4 FT STD. SIZE (SIZES CAN BE AVAILABLE 2.5,3,3.5,4,5,6,7,8,9,10-12 FT OR CUSTOM LENGTH . WIDTH WILL REMAIN 4 FT ONLY) shipping free on orders above 1 LAKH INR (IN INDIA (IN INDIA))
Add to Cart
₹224
HAVING S.S. PULVERIZER ,6-8 KG/Hr. CAPACITY FOR WHEAT FLOUR MAKING
Add to Cart
₹10,990
Air Water Heater 500 LPD (a miracle device for water heating) heat pump technology ("AWH500")
  • Hot water for washrooms, laundry & kitchen in home, hotels, hospitals, hostels
  • Boiler feed water for pre-heating
  • Jacketed vessels heating
  • Pasteurization & CIP in dairy industries
  • Vessels or line washing & cleaning
  • Hot water for floor washing & cleaning
  • Hot water for component washing or pickling process (5 or 7 tank)
  • Hot water for leather or textile dying
  • Pulses, nuts, fruits, vegetable drying
  • Tray dryer or fluidized bed dryer
  • Hot water for process & various types of process heating
A miracle device for water heating purpose at 20-25% energy v/s elec. gysers, even cheaper than solar water heating (HEAT PUMP BASED TECHNOLOGY) GST 18% EXTRA ON PRICE+SHIPPING
Call To Order  
₹125,000
WPC Decking 145mm X9.5 ft long (155mm x 9.5 ft)
Wood-plastic composites (WPCs) are composite materials made of wood fiber/wood flour and thermoplastic(s) This type of WPC is WPC decking and are intended for outdoor usage.
for use in front facade, decking for swimming pools,ferries,yatch,ships,beach houses etc and filler of building entrance and outdoor gates.
Add to Cart
₹1,425
TATA SWACH WATER PURIFIER ULTIMA 7 STAGE (ULTIMA)
nstallation: Free installation is provided on this product by the manufacturer. For requesting an installation/demo for this product once delivered, please call the manufacturer's customer support directly on 18002585858 and provide the product's model name It turns even hard water upto 2000 ppm into tasty water Special silver safety for extra cartridge life NSF certified RO membrane, 7 liters zero contamination storage tank Advanced 6 stage purification technology, voltage spike guard protection and stylish tap Single click opening and unique double i care indicator Body material: ABS, Type: Wall mounted Inlet water pressure: Minimum 5 psi and maximum 35 psi, Inlet water temperature: 2 degree centigrade to 49 degree centigrade Auto-flushing system: Yes, Weight 11.05 kilograms, Tank volume: 7 liters Operating voltage: 160 to 270 volts, Membrane type: Thin layer composite Warranty: 6 Months Shrink pack size: 1 Power: 11 watts
Add to Cart
₹13,880
CPVC SOCKET TANK NIPPLE 25 mm ( 1" ) KML classic brand (CPVCSKTTNKNPL25MM)
to be used with kml classic cpvc solvent cement discounts available on Packets & Box Buying
Std Packing : BOX = 150 nos. ( 06 X 25 pcs in POLYTHENE PACK)
Size:25mm A PRODUCT OF KISAN MOULDINGS LIMITED
Add to Cart
₹47
CPVC REDUCER MTA BRASS 25 X 15 mm ( 1 X 1/2" ) KML classic brand (CPVCREDBRASSMTA2515MM)
to be used with kml classic cpvc solvent cement sizes available 15 to 50 mm discounts available on Packets & Box Buying
Std Packing : BOX = 150 nos. ( 06 X 25 pcs in POLYTHENE PACK)
Size:25 X 15mm A PRODUCT OF KISAN MOULDINGS LIMITED MALE THREAD ADOPTER
Add to Cart
₹134
KML classic CPVC MTA 32 MM(Male Thread Adapter ) 32 mm (1-1/4") (CPVCMTA32MM)
to be used with kml classic cpvc solvent cement sizes available 15 to 50 mm discounts available on Packets & Box Buying
Std Packing : BOX = 180 nos. (18 x 10 pcs in POLYTHENE PACK)
Size 32 mm ( 1-1/4" )
Add to Cart
₹32
STRUCTURE FOR SOLAR PANEL (SOLARSTRUCTUREMSBP)
SOLAR STRUCTURE AS PER MNRE STANDARD SPECIFICATIONS. M.S B.P FINISH specifications are subject to change without notice. supply may differ from the pictures shown,which are notional
5%ON PRICE+SHIPPING EXTRA (IF PURCHASED WITH SOLAR PENAL AND PCU), ORDERS ACCEPTED FOR RAJASTHAN STATE ONLY
AAV BLOCK 625X200X200MM
AAC Blocks 25"X 8"X 3" (minimum order 106 nos.) (625x200x75 MM)
Autoclaved Lightweight/Aerated Concrete block is shorted for AAC/ ALC block, using silica sand, cement and lime as the raw material, aluminium powder as the foaming agent, after high temperature, high pressure steam is raised. Easy to cut and install, is widely used to construct internal and external wall. AAC block is also one kind of self-heat preservation materials, makes the external wall an excellent thermal insulation system.




Total Price does not include taxes. Additional IGST 12% Charges will be applicable.

Shipping & Packaging:

Delivery timeline 3-5 business days. Orders within 200 kms vicinity from Ajmer are accepted

generally known as siporex also
Autoclaved Aerated Concrete Light Weight AAC Blocks (A miraculous walling material ) replacement of red clay bricks. GST12% EXTRA ON PRICE+SHIPPING
Add to Cart
₹29
IC PRECISEAL 1 kg pack WATERPROOFING SOLUTION (ICPRECISEAL)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO 25 SQ. FT. AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“IC PRECISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“IC PRECISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

“IC PRECISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of 
“IC PRECISEAL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “IC PRECISEAL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “IC PRECISEAL” or polymer modified mortar prior to coating the entire area prior to the application of “IC PRECISEAL”.
Mixing proper and thorough mixing of the “IC PRECISEAL” is very important for optimum results. 
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “IC PRECISEAL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “IC PRECISEAL” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

“IC PRECISEAL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“IC PRECISEAL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “IC PRECISEAL” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “IC PRECISEAL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “IC PRECISEAL” in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “IC PRECISEAL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once hardened, “IC PRECISEAL” is very difficult to dislodge.Though “IC PRECISEAL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“IC PRECISEAL” is available in 25 kg packaging.Storage & Shelf LifeStore in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“IC PRECISEAL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UP TO 25 SQ. FT. APPROX AREA ON CLEAN AND PLAIN NON-ABSORBING SURFACE
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND (Inclusive of GST @18% + shipping)
Add to Cart
₹280
7 PATTERN SPRINKLER for various uses GREEN SEASONS brand (NOZZLE7PATTERN)
HAVING STEP TYPE HOSE COLLER TO ACCEPT 12 TO 20 MM FLEXIBLE GARDEN HOSE OR PVC FLEXIBLE PIPES
WORKS ON OVERHEAD TANK PRESSURE 14.2 TO 20 PSI ONLY
SPRAY PATTERNS: SHOWER, CONE, JET, SOAKER, CENTER, MIST, FLAT
VEDIO SHOWN IS SHOW FLOW PATTERNS OF THE NOZZLE WORKS.
PROFESIONAL HEAVY DUTY,BRASS VALVE STEM,SPRAY HOT OR COLD LIQUIDS,INSTANT ON OFF 12% GST EXTRA SHIPPING FREE gardening,kitchen gardening, water saving car washing, masonry watering,tarai etc.construction activities
Add to Cart
₹550
CPVC SS METAL CLAMP 20 MM (PIPE CLIP) 3/4" KML classic brand (CPVCSSMETALCLIP20MM)
to be used with kml classic cpvc solvent cement sizes available 15 to 50 mm discounts available on Packets & Box Buying
Std Packing : BOX = 500 nos. ( 05 X 100 pcs in POLYTHENE PACK)
Size:20mm A PRODUCT OF KISAN MOULDINGS LIMITED
CPVC UNION 15 mm ( 1/2" ) KML classic brand (CPVCUNION15MM)
to be used with kml classic cpvc solvent cement sizes available 15 to 50 mm discounts available on Packets & Box Buying
Std Packing : BOX = 200 nos. ( 10X20 pcs in POLYTHENE PACK)
Size:15mm A PRODUCT OF KISAN MOULDINGS LIMITED
Add to Cart
₹40
KML classic CPVC REDUCER MTA 20X15 MM (Male Thread Adapter ) (CPVCREDMTA2015MM)
to be used with kml classic cpvc solvent cement sizes available 15 to mm discounts available on Packets & Box Buying
Std Packing : BOX = 800 nos. (8 x 100 pcs in POLYTHENE PACK)
Size:20X15 mm (3/4" X 1/2" )
Add to Cart
₹17
MEMBRANE FOR TATA SWACH WATER PURIFIER PLATINA SILVER R O (TATASWACHMEMBRANE75)
It turns even hard water up to 2000 ppm into tasty water Special silver safety for extra cartridge life Body material: ABS, Type Inlet water pressure: Minimum 5 psi and maximum 35 psi, Inlet water temperature: 2 degree centigrade to 49 degree centigrade. Membrane type: Thin layer composite WARRANTY NIL
75 GPD (GALLONS PER DAY) CAPACITY
Add to Cart
₹2,110
WPC SHEET 8X4 FT =32 SQ FT SIZE 5,6,8,10,12,16,18,20,24,30 MM (RATES ARE IN PER MM/32SQ.FT) (wpcsheet8x4ft)
Wood-plastic composites (WPCs) are composite materials made of wood fiber/wood flour and thermoplastic(s) This type of WPC are intended for indoor as well as outdoor usage.
100% water and termite proof.
SHIPPING FREE ON ORDERS ABOVE 1 LAKH INR (IN INDIA)
SIZE 8 X 4 FT STD. SIZE (SIZES CAN BE AVAILABLE 2.5,3,3.5,4,5,6,7,8,9,10-12 FT OR CUSTOM LENGTH . WIDTH WILL REMAIN 4 FT ONLY) shipping free on orders above 1 LAKH INR (IN INDIA (IN INDIA))
Add to Cart
₹224
PRAGATI STONELESS DOMESTIC FLOUR MILL (PRAGATI GOLD)
HAVING S.S. PULVERIZER ,6-8 KG/Hr. CAPACITY FOR WHEAT FLOUR MAKING
Add to Cart
₹10,990
Per Page      1 - 20 of 32