DIY ( Do It Yourself )

DO IT YOURSELF SOLUTIONS
Sort By:  
GST EXTRA 18% ON PRICE AND SHIPPING
Add to Cart
₹780
HAND OPERATED GST ON PRICE + SHIPPING EXTRA
HAND OPERATED GST ON PRICE + SHIPPING EXTRA
6 MTR LENGTH PER PIPE RATE, One end socketed , GST ON SHIPPING+PRODUCT PRICE EXTRA @18% RIGID PVC PIPE
Add to Cart
₹723
A FANTASTIC TIME SAVING AND ACCURACY MAINTAINING DEVICE FOR EVERY PLUMBER AND ELECTRICIAN INCLUSIVE OF GST AND SHIPPING DELIVERY 10-20 DAYS,SUBJECT TO FOORCE MAJURE.
Add to Cart
₹7,700
FOR PEELING FRESH GARLIC WITHOUT HEATING OR BOILING CAPACITY 8-10 Kg/Hr APPROX, 220 VOLTS <200 WATTS.............GST 5% ON SHIPPING + PRICE EXTRA
Add to Cart
₹41,000
FOOD GRADE S.S. BODY, 1.2 KVA 230 VOLT MOTOR SINGLE PHASE SUPPLY, SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE
Call To Order  
₹70,000
A FANTASTIC TIME SAVING AND ACCURACY MAINTAINING DEVICE FOR EVERY PLUMBER AND ELECTRICIAN SHIPPING AND G.S.T.18% ON PRICE PLUS SHIPPING EXTRA
Call To Order  
₹26,000
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND 18% GST on product and shipping extra
Add to Cart
₹3,799
6 MTR LENGTH PER PIPE RATE, One end socketed , GST ON SHIPPING+PRODUCT PRICE EXTRA @18% RIGID PVC PIPE
Add to Cart
₹668
with Harness Belt. Toolkit. Special feature is having 2 gears fitted between motor and shaft for more extra load (GST 12% ON PRICE+SHIPPING)
Add to Cart
₹9,999
TABLE TOP MODEL FOOD GRADE S.S. BODY, 1.0 KVA 230 VOLT MOTOR SINGLE PHASE SUPPLY, CAPACITY UPTO 2.5 KG PER MINUTE.................... SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE...........GST 18% EXTRA ON PRICE+SHIPPING
Call To Order  
₹59,300
6 MTR LENGTH PER PIPE RATE, One end socketed , GST ON SHIPPING+PRODUCT PRICE EXTRA @18%
Add to Cart
₹313
HOME TOOL KIT OF 6 PCS. DIY (DO IT YOURSELF) (HOMEKIT6PCS)

6 PCS. DIY Home Tool Kit

Product Details
1 - Screw Driver Kit 
Consist of Transparent Cellulose Acetate Handle with 
Neon Bulb Tester (500V~) & 8 Blades
2 - DOE Spannners - 10x12, 14x17mm
1 - Combination Plier - 8" /200mm
1 - Water Pump Plier - 10" /250mm
1 - Ball Pen Hammer - 300Gms

GST EXTRA 18% ON PRICE AND SHIPPING
Add to Cart
₹780
GRAINS SIEVING MACHINE 50 KG/HR CAPACITY , GST 5% EXTRA ON SHIPPING AND PRODUCT (05GRAINCLEANING)
A MIRACULOUSLY LOW ENERGY ELECTRIC CONSUMPTION MACHINE WITH 0.5 H.P. MOTOR AND FAN FOR EFFECTIVE CLEANING OF GRAIN LIKE WHEAT,BAJRA,JEERA, CHANA, MAKKA ETC
2 STD SIEVE AND 4 OPTIONAL SIEVES AVAILABLE
Call To Order  
₹32,000
Vidhata Cream Separators 100 LPH (vidhata)

FEATURES

  • Milk separation bowl is made from stainless steel
  • Milk tank,spout set,flot are made from stainless steel
  • Bowl is dynamically balance
  • Hand operated machine
  • Cream regulator for thick and thin cream

SPECIFICATION :

Milk separation capacity

100 LPH

Bowl speed

7300 RPM

Fresh milk input

STRAINED

Fresh milk temperature

30 TO 40 C

Tank capacity

10 LITTER

No of disk

10 DISK

Drive

GEAR BOX,HAND OPERATED

Dimension unpacked

——————

Dimension packed

32*32*28 CMS(main body) 41*41*28 CMS(milk tank
and its accessories) (there are two boxes . one for main
body and another For milk tank and its accessories.)

Weight unpacked

15 TO 17KGS

Weight packed

20 TO 22 KGS.

HAND OPERATED GST ON PRICE + SHIPPING EXTRA
Vidhata Cream Separators 60 LPH (vidhata)

FEATURES

  • Milk separation bowl is made from stainless steel
  • Milk tank,spout set,flot are made from stainless steel
  • Bowl is dynamically balance
  • Hand operated machine
  • Cream regulator for thick and thin cream

SPECIFICATION :

Milk separation capacity

60 LPH

Bowl speed

7300 RPM

Fresh milk input

STRAINED

Fresh milk temperature

30 TO 40 C

Tank capacity

10 LITTER

No of disk

10 DISK

Drive

GEAR BOX,HAND OPERATED

Dimension unpacked

——————

Dimension packed

32*32*28 CMS(main body) 41*41*28 CMS(milk tank
and its accessories) (there are two boxes . one for main
body and another For milk tank and its accessories.)

Weight unpacked

12 TO 13KGS

Weight packed

15 TO 16 KGS.

HAND OPERATED GST ON PRICE + SHIPPING EXTRA
SAFTY WALK GENERAL PURPOSE ANTI-SLIP ADHESIVE TAPE 50MMX18 MTRS ROLL (SAFETYWALK610)

 3M™ Safety-Walk™ 610

General Purpose Anti-slip Adhesive Tape


Safety-Walk™ 610General Purpose Anti-slip Adhesive Tape

3M™ Safety-Walk™ 610 consists of abrasive particles bonded by a sustainable tough, durable polymer to a dimensionally stable plastic film. The reverse side is coated with a rubber based pressure sensitive adhesive, covered by a removable protective liner. As part of implemented sustainability improvement on this product by water-based manufacturing process, the product provides an improved durable, slip resistant surface for a large variety of applications.Primarily for use as a durable, slip resistant surface for dry, wet, oily floors in industrial and commercial applications with intensive pedestrian or light vehicle traffic such as: corridors, production and storage rooms, ramps, stairways, ladders, footplates on machines, emergency exits.- Improved sustainability (environmental benefit)- Certified as phthalate-free- Improved safe, slip resistant surface- Improved high durability- Improved weathering- More resistant to chemicals- UV resistant- Easy to install by higher flexibility at cold weather performance- Excellent bond to most dry, clean, smooth surfaces
GST 18% EXTRA
Add to Cart
₹3,500
KISAN RPVC AGRI. PIPE 110 MM 4Kg/Cm2 PRESSURE CLASS II, ISI MARKED IS 4985 (KISANRPVC110-4-6MTR)
Available in 6 mtr length as standard practice

Agri fitting i.e. bend,elbow,tee,end cap, coupler,reducer,reducing socket,socket, mta fta,ball valve, tail piece,flange,reducing elbow, reducing tee, reducing bush for rpvc pipes are also available.

RIGID PVC PIPES ARE SIZED AS PER O.D. 

I.D. OF PIPE WILL CHANGE AS PER PRESSURE CLASS OF PIPE.
PRODUCT SPECIFICATION WILL BE APPLICABLE AS PER CURRENT SPECIFICATION GIVEN BY MANUFACTURER,SUBJECT TO CHANGE WITHOUT NOTICE.
6 MTR LENGTH PER PIPE RATE, One end socketed , GST ON SHIPPING+PRODUCT PRICE EXTRA @18% RIGID PVC PIPE
Add to Cart
₹723
WALL CHASER 110MM JOSCH JWC4 TYPE FOR GROOVING IN MASONRY AND MORTAR OR AAC BLOCKS TO FIX PIPING AND CONDUITING FOR ELECTRICAL WIRING PURPOSE (JWC41600W)



1600 WATTS, 230 VOLT A.C. WARRANTED FOR 6 MOTHS FOR DEFECT DUE TO MANUFACTURING, BUT NOT FOR WINDINGS

Features:
This most ubiquitous machine in the industry comes with a heavy duty motor housed in high grade engineering plastic with the gear assembly housed in solid aluminum alloy castingThe machine is light weight and compact design for ease in operationIt has an adjustable base to adjust the depth of cut

Application:
The machine is mainly used for cutting marble, granite and all other kinds of stones and masonary materialsIt is also used for making grooving in the above materials.FeaturesGENERALBrand: JoschCapacity: 110 mmModel: JWC 4No Load Speed: 11000 rpmPower: 1600 WWeight: 4.4 Kg

WALL SLOTTER, SLOTTING IN WALLS
A FANTASTIC TIME SAVING AND ACCURACY MAINTAINING DEVICE FOR EVERY PLUMBER AND ELECTRICIAN INCLUSIVE OF GST AND SHIPPING DELIVERY 10-20 DAYS,SUBJECT TO FOORCE MAJURE.
Add to Cart
₹7,700
GARLIC PEELING MACHINE (NANU1)
GARLIC PEELING BECAME EASY. BESIDES PEELING OF GARLIC THIS MACHINE CAN PEEL ROASTED GROUNDNUTS, POLISHES CEREALS LIKE MOONG,URD ETC.NOTE:- PROFILE OF MATERIAL MAY DIFFER THAN THE PICTURE SHOWN

With the peeled garlic , you don’t have to suffer for time get the flavour and aroma of garlic for your Indian dishes. Most cuisines use garlic a lot including Indian and Italian so if you’re making such dishes you’ll find the pure peeled garlic within no time or ready for use You can make tasty meals on time with peeled garlic by the above machine.it can be developed as a business from home or DO IT YOURSELF

FOR PEELING FRESH GARLIC WITHOUT HEATING OR BOILING CAPACITY 8-10 Kg/Hr APPROX, 220 VOLTS <200 WATTS.............GST 5% ON SHIPPING + PRICE EXTRA
Add to Cart
₹41,000
SUGAR CANE JUICE EXTRACTOR ,COMMERCIAL USE THREE ROLLER (SUGARCANECRUSHER1.2KVA)
FOOD GRADE S.S. BODY, 1.2 KVA 230 VOLT MOTOR SINGLE PHASE SUPPLY, SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE
Call To Order  
₹70,000
ELBOW 16 MM FOR DRIPPLINE GST 12% EXTRA (ELBOW16MMDRIP)
BRAND, COLOUR AND PROFILE SHOWN MAY DIFFER IN SUPPLY,BUT QUALITY IS ASSURED.
GST 12% EXTRA , SHIPPING FREE
NUSHAR SMART MORTA CARE 20 ltr (LIQUID ADMIXTURE FOR CEMENT) (SMARTMORTACARE20L)
NUSHAR Smart Morta-care is a chemical admixture that is to be added to concrete mixtures to improve workability and strength by helping the cement to react and cure fully. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good workability.

Features:-

Improves Work-ability

Water Reducer

Improves Strength

Reduces Surface Erosion

Fast Curing

Reduces Surface Cracks

Economical

Appearance Tan brown Liquid. Density 1.193 Viscosity 14.45 sec. Dosage 1-2 % (of water) Storage Cool & dry place @25ºc Solubility Water soluble Water reduction upto 20% [Concrete, Mortar, Plaster ]
INCLUSIVE GST 18% SHIPPING FREE
Add to Cart
₹2,609
WALL CHASER FOR GROOVING IN AAC BLOCKS MASONRY AND MORTAR TO FIX PIPING AND CONDUITING FOR ELECTRICAL WIRING PURPOSE (WALLCHASER1600W)
A FANTASTIC TIME SAVING AND ACCURACY MAINTAINING DEVICE FOR EVERY PLUMBER AND ELECTRICIAN SHIPPING AND G.S.T.18% ON PRICE PLUS SHIPPING EXTRA
Call To Order  
₹26,000
IC PRECISEAL 25 KG BAG WATERPROOFING SOLUTION (ICPRECISEAL25KG)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO 250 SQ. FT. AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“IC PRECISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“IC PRECISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

“IC PRECISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of
“IC PRECISEAL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “IC PRECISEAL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “IC PRECISEAL” or polymer modified mortar prior to coating the entire area prior to the application of “IC PRECISEAL”.
Mixing proper and thorough mixing of the “IC PRECISEAL” is very important for optimum results.
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “IC PRECISEAL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “IC PRECISEAL” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

“IC PRECISEAL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“IC PRECISEAL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “IC PRECISEAL” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “IC PRECISEAL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “IC PRECISEAL” in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “IC PRECISEAL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once hardened, “IC PRECISEAL” is very difficult to dislodge.Though “IC PRECISEAL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“IC PRECISEAL” is available in 25 kg packaging.Storage & Shelf LifeStore in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“IC PRECISEAL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND 18% GST on product and shipping extra
Add to Cart
₹3,799
KISAN RPVC AGRI. PIPE 63 MM 10Kg/Cm2 PRESSURE ISI MARKED CLASS IV IS 4985 (KISANRPVC63-10-6MTR)
Available in 6 mtr length as standard practice

Agri fitting i.e. bend,elbow,tee,end cap, coupler,reducer,reducing socket,socket, mta fta,ball valve, tail piece,flange,reducing elbow, reducing tee, reducing bush for rpvc pipes are also available.

RIGID PVC PIPES ARE SIZED AS PER O.D. 

I.D. OF PIPE WILL CHANGE AS PER PRESSURE CLASS OF PIPE.
6 MTR LENGTH PER PIPE RATE, One end socketed , GST ON SHIPPING+PRODUCT PRICE EXTRA @18% RIGID PVC PIPE
Add to Cart
₹668
Professional Electric GRASS TRIMMER having 1400 watts motor with heavy trimmer head 3 teeth metal blade (GARDENKING)
OPTIONAL NYLON CUTTER CAN BE SUPPLIED ON EXTRA PRICE
with Harness Belt. Toolkit. Special feature is having 2 gears fitted between motor and shaft for more extra load (GST 12% ON PRICE+SHIPPING)
Add to Cart
₹9,999
CHUKKY SUGAR CANE JUICE EXTRACTOR , THREE ROLLER TYPE गन्ने का रस निकालने की मशीन (CHUKKYJUICER3ROLLERSS)

Table top model sugarcane juicer specification

 

1.Fully Food Grade S.S. 304. material machine
2. 100 % hygienic juicer machine
3. Total noiseless & durable for easy operate
4. 3 roller type machine
5. Two time crushing in single passing
6. 95 % Juice Collect in Single Passing ( no need to pass sugarcane in the machine second time)
7. Crushing Capacity : 2.5kg sugarcane per minute.
8. Average Yield Capacity : 500 to600 ML juice per kg of sugarcane ( depend on sugarcane quality)
9. Power Consumption : less than 1 unit in 1 hour
10. Motor: 1 HP single phase motor.
11. Production:60 to 70 liter in 1 hour
12. Removable Roller for easy cleaning
13. Easy operating for any person.
14. Machine reverse and forward option.
15. Separated Side electrical panel in machine.
16. Machine Weight: 75 KG
17. Dimension : 24 x 24 x 12 ( L x H X W)

TABLE TOP MODEL FOOD GRADE S.S. BODY, 1.0 KVA 230 VOLT MOTOR SINGLE PHASE SUPPLY, CAPACITY UPTO 2.5 KG PER MINUTE.................... SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE...........GST 18% EXTRA ON PRICE+SHIPPING
Call To Order  
₹59,300
SMART MASTER COAT NUSHAR 22.5 KG EHB (EXTRA HIGH BONDING) ANTI HEAT COATING (MASTERCOATEHB22.5KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹8,999
KISAN RPVC AGRI. PIPE 63 MM 4Kg/Cm2 PRESSURE ISI MARKED CLASS II IS 4985 (KISANRPVC63-4-6MTR)
Available in 6 mtr length as standard practice

Agri fitting i.e. bend,elbow,tee,end cap, coupler,reducer,reducing socket,socket, mta fta,ball valve, tail piece,flange,reducing elbow, reducing tee, reducing bush for rpvc pipes are also available.

RIGID PVC PIPES ARE SIZED AS PER O.D. 

I.D. OF PIPE WILL CHANGE AS PER PRESSURE CLASS OF PIPE.
6 MTR LENGTH PER PIPE RATE, One end socketed , GST ON SHIPPING+PRODUCT PRICE EXTRA @18%
Add to Cart
₹313
LITTLEHOME FORCE 30 MODEL DESERT COOLER INDOOR /OUTDOOR/ PATIO DUTY 230 VOLT AC (LITTELHOME FORCE 30)
Force 30

Technical Specification:-
Motor - 550W,
3 Speed Fan Dia -- 30"
Sound Level --65db
Cooling media - Cellulose Pad
Dimension (in mm) - 1524 x 1120 x 610.
30" fan , noise level 69 decibels HOME APPLIANCES
Call To Order  
₹33,099
SMART MASTER COAT NUSHAR 2.25 KGANTI HEAT COATING (MASTERCOAT2.25KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹1,049
Per Page      1 - 20 of 55