NUSHAR INDIA FUTURE TECH PVT LTD

Sort By:  
200 ML, 1ltr,5, and 20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹109
500 ML, 1ltr,5, and 20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹59
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹2,649
A PRODUCT OF NUSHAR INDIA FUTURE TECH PVT LIMITED
200 ML, 500 ML, AND 10-20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹179
200 ML,500 ml, 1ltr, and 20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹799
NUSHAR SMART MORTA CARE 500Ml (LIQUID ADMIXTURE FOR CEMENT) (SMARTMORTACARE500ml)
NUSHAR Smart Morta-care is a chemical admixture that is to be added to concrete mixtures to improve workability and strength by helping the cement to react and cure fully. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good workability.

Features:-

Improves Work-ability

Water Reducer

Improves Strength

Reduces Surface Erosion

Fast Curing

Reduces Surface Cracks

Economical

Appearance Tan brown Liquid. Density 1.193 Viscosity 14.45 sec. Dosage 1-2 % (of water) Storage Cool & dry place @25ºc Solubility Water soluble Water reduction upto 20% [Concrete, Mortar, Plaster ]
200 ML, 1ltr,5, and 20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹109
SMART MASTER COAT NUSHAR 22.5 KG ANTI HEAT PAINT (MASTERCOAT22.5KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹8,499
SMART MASTER COAT NUSHAR 22.5 KG EHB (EXTRA HIGH BONDING) ANTI HEAT COATING (MASTERCOATEHB22.5KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹8,999
NUSHAR SMART MORTA CARE 200 Ml (LIQUID ADMIXTURE FOR CEMENT) (SMARTMORTACARE200ml)
NUSHAR Smart Morta-care is a chemical admixture that is to be added to concrete mixtures to improve workability and strength by helping the cement to react and cure fully. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good workability.

Features:-

Improves Work-ability

Water Reducer

Improves Strength

Reduces Surface Erosion

Fast Curing

Reduces Surface Cracks

Economical

Appearance Tan brown Liquid. Density 1.193 Viscosity 14.45 sec. Dosage 1-2 % (of water) Storage Cool & dry place @25ºc Solubility Water soluble Water reduction upto 20% [Concrete, Mortar, Plaster ]
500 ML, 1ltr,5, and 20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹59
SMART MASTER COAT NUSHAR 1 KGANTI HEAT COATING (MASTERCOAT1KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹499
SMART MASTER COAT NUSHAR 2.25 KGANTI HEAT COATING (MASTERCOAT2.25KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹1,049
SMART MASTER COAT NUSHAR 1 KG EHB (EXTRA HIGH BONDING) (MASTERCOATEHB1KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹549
SMART MASTER COAT NUSHAR 6 KG ANTI HEAT COAT (MASTERCOAT6KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹2,649
SMART MASTER COAT NUSHAR 2.25 KG EHB (EXTRA HIGH BONDING) ANTI HEAT COATING (MASTERCOATEHB2.25KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹1,099
SMART MASTER COAT NUSHAR 11.25 KG ANTI HEAT COATING (MASTERCOAT11.25KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹4,649
TRUE AEGIS MULTY POLYMER WALL PUTTY (TRUEAEGISPUTTY)

True Aegis Multi Polymer Wall Putty

True Aegis is Superior quality product of Nushar India. It is Multi Polymer wall putty white cement base and wall finishing putty.

It is True Putty with true Polymers.
Highly recommended by constructions engineers and experts.

True Aegis key features are as below:-

  • Lime free
  • Moisture Resistance
  • Polymer Putty
  • Smooth Finishing for wall
  • Maximum coverage
  • Premium Quality 
A PRODUCT OF NUSHAR INDIA FUTURE TECH PVT LIMITED
SMART MASTER COAT NUSHAR 6 KG EHB (EXTRA HIGH BONDING) ANTI HEAT COAT (MASTERCOATEHB6KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹2,849
FRANKFURT STONE/TILE /FLOOR POLISHING MACHINE (FRANKFURTFLOORPOLISHERHY)
Heavy weight for higher productivity, stability and durability. Thick sheet body for strength and long life Heavy duty steel coupling for long life operations. Voltmeter I Ampere meter for convenient operations. Heavy duty electric motor of 3.8 HP(Special Design) for high performance and productivity. Minimum maintenance is required Inbuilt water tank for continuous water supply for higher productivity and better result Heavy abrasive holding plate for higher productivity, stability and best result
Essential Construction Chemicals that we offer: Smart Master Coat (Waterproofing & Heatproofing) Poly Fillastomer Smart C.C.P. Mix+ Smart Morta Care Smart Membrane Poly-Fib Master Polymer Laminate Putty Mix Old Paint Fixer Smart Exterior Care Mother Coat Master Adhesive Nano Top Coat Exclusive Stone Processing Products list: Diamond Abrasive Poly Shine Stone Bond (GQT-Special) Magic Bond ECO Poly Shine Stone Coat Super Glosser Liquid Polish Stone Care Stone-Xtra Dura Deep Diamond Tools For Stone/Tiles SIC Abrasive for Stone/Floors Wax Polish
3.8 H.P. 230 VAC MOTOR,HEAVY DUTY
Call To Order  
₹31,999
NUSHAR SMART MORTA CARE 20 ltr (LIQUID ADMIXTURE FOR CEMENT) (SMARTMORTACARE20L)
NUSHAR Smart Morta-care is a chemical admixture that is to be added to concrete mixtures to improve workability and strength by helping the cement to react and cure fully. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good workability.

Features:-

Improves Work-ability

Water Reducer

Improves Strength

Reduces Surface Erosion

Fast Curing

Reduces Surface Cracks

Economical

Appearance Tan brown Liquid. Density 1.193 Viscosity 14.45 sec. Dosage 1-2 % (of water) Storage Cool & dry place @25ºc Solubility Water soluble Water reduction upto 20% [Concrete, Mortar, Plaster ]
INCLUSIVE GST 18% SHIPPING FREE
Add to Cart
₹2,609
SMART MASTER COAT NUSHAR 11.25 KG EHB (EXTRA HIGH BONDING) ANTI HEAT PAINT (MASTERCOATEHB11.25KG)
Description:-
Heat proof and 100% Water proof coat
Due to Global Warming, atmospheric temperatures are increasing continuously, causes increase in heating of building structures ,which makes life difficult and results in in-efficient working.

To prevent high heating of building it is necessary to thermal insulate the building structures.
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure.
Consequently cracks development takes place.
Ultimately resulting water seepage through cracks in rainy season.
Water is the most destructive weathering element of concrete, masonry & natural stone structures. Water continuously damage or completely destroy more buildings & structures than war or natural disasters.
Material penetrates in the surface which covers and seals all the invisible pores resulting in 100% water proofing. 
High drop in Internal temperature.
Reduces electricity bills used for cooling the building.
A more productive working environment without air conditioning.
You can walk on roof surface even in peak sun light.
Roof is protected from thermal shock due to varying sun load.
High crack bridging ability.
Remarkable elasticity to cope up with thermal expansion and contraction.
Environmentally safe and convenient to apply.
Non toxic food grade film after curing.
Roof and terrace water & heat proof coatings.
Solar heat proof paints.High performance heat reflective paint, cool roof coatings, summer cool paint.
Features:-
100% Water Proofing Up to 85 % Heat Proofing Anti Rust,Anti Bacterial, Anti Fungal,Food Grade,Washable,Wear Resistant,High Adhesion,Saves Maintenance,Saves Energy, Saves Oxidation, Saves Deterioration, Hygenic,Saves Health, Maintain Aesthetics,No Wear & Tear,Highly Durable.
Specifications:-
Temperature Resistant Up to 95ºc Water Proofing,Excellent Working Tempreture Above 18ºc Thermal Conductivity Very Low (0.101 w/m2k approx)Thickness of Coating 125-200 Micron Adhesion No Peeling off, Solar Reflectivity 80-90%, Viscosity 21.5 Pa.s Density 1.56 gm/cc, Coverage Area16-22 sq. ft./ per kg 
Composition:-
Co-Polymer & Cross-link Polymers Weather Proofing Excellent Durability High,Over Coat Time2-3 Hrs ( 20ºC); 1-2 Hrs ( 35ºC); 15-30 Min ( 45ºC)Complete Cure72 hrs. @ 25ºC.

Areas of Application
Terrace Water Proofing & Heat Proofing Water Storage Tank Water Proofing Foundation ( To stop capillary up-liftment & stop fungal, bacterial & chemical attacks)Super Exterior Coat (Water, heat, fungus, bacteria, fading proof)Roof / Terrace Garden Factory sheds (Tin, Asbestos, Plastic)Bathrooms / Kitchens Plastic Water Tank Heat Proofing A/C, Cooler Ducts Water Proof Primer on Plaster 
How to use or Apply FOR TERRACES/ EXTERIOR WALLS/ WATER STORAGE TANKS etc.
SURFACE PREPARATION :Clean the surface thoroughly, as it should be free from dust, oil, grease or any free/loose partIcle. Remove the existing paint layer/coating before application.It is recommended to use wire brush followed by sanding with emery.Water wash the surface before smart master coat application.
APPLICATION :-
Mix/stir the material thoroughly.Apply the first coat (SMC : Water = 2 : 1).Wait for minimum 1 to 2 hour & then apply second coat (Pure SMC).Confirm that after third or fourth coat the surface is opaque.Let the final coat cure for 20-40 hours before use.
PROCESS FOR REPAIRING CRACKS (Fibre re-inforcement technique)Apply first coat of Smart Master Coat (SMC : Water=2 : 1). Wait for 10-20 minutes.Fill the crack with Nushar’s Poly Fillastomer paste (Crack filling polymer compound)Apply the second coat of Smart Master Coat.Immediately lay a strong cotton cloth dipped in Smart Master Coat on the crack area and press the cloth with iron blade.After waiting for next 20-30 minutes apply two or more coats.Success in Water Proofing Depends : 50% on Material and 50% on Execution of Proper Procedures.
GST 28% INCLUSIVE - SHIPPING FREE
Add to Cart
₹4,949
NUSHAR SMART MORTA CARE 1 ltr (LIQUID ADMIXTURE FOR CEMENT) (SMARTMORTACARE1L)
NUSHAR Smart Morta-care is a chemical admixture that is to be added to concrete mixtures to improve workability and strength by helping the cement to react and cure fully. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good workability.

Features:-

Improves Work-ability

Water Reducer

Improves Strength

Reduces Surface Erosion

Fast Curing

Reduces Surface Cracks

Economical

Appearance Tan brown Liquid. Density 1.193 Viscosity 14.45 sec. Dosage 1-2 % (of water) Storage Cool & dry place @25ºc Solubility Water soluble Water reduction upto 20% [Concrete, Mortar, Plaster ]
200 ML, 500 ML, AND 10-20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹179
NUSHAR SMART MORTA CARE 5 ltr (LIQUID ADMIXTURE FOR CEMENT) (SMARTMORTACARE5LTR)
NUSHAR Smart Morta-care is a chemical admixture that is to be added to concrete mixtures to improve workability and strength by helping the cement to react and cure fully. Unless the mix is "starved" of water, the strength of concrete is inversely proportional to the amount of water added or water-cement (w/c) ratio. In order to produce stronger concrete, less water is to be added, which makes the concrete mixture less workable and difficult to mix, necessitating the use of Smart Morta Care for good workability.

Features:-

Improves Work-ability

Water Reducer

Improves Strength

Reduces Surface Erosion

Fast Curing

Reduces Surface Cracks

Economical

Appearance Tan brown Liquid. Density 1.193 Viscosity 14.45 sec. Dosage 1-2 % (of water) Storage Cool & dry place @25ºc Solubility Water soluble Water reduction upto 20% [Concrete, Mortar, Plaster ]
200 ML,500 ml, 1ltr, and 20 LTRS PACK AVAILABLE ALSO
Add to Cart
₹799
Per Page      1 - 17 of 17