LARSEN BUILDING PRODUCTS INDIA (P) LTD

Sort By:  
20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹630
20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹260
20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹495
40 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹390
20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹225
20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹750
20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹240
LARSEN STANDARD TILE ADHESIVE (WHITE) SETFLEX EN 21 TA (LARSENSETFLEX21TAWHITEKG20)

LARSEN Set Flex 1200 F & W develops extended work ability and a high standard of performance even in environment subject to extreme stress, meaning all types of ceramic tiles can be laid on mineral of cement based substrates.

 

PRODUCT STRENGTH

  • Floors and walls, for internal and external use.
  • Ideal for Laying Aqua Expert systems.
  • Suitable for verified and ceramic tiles, large formats, low thickness slabs and stable natural stone.
  • Floors and walls, for internal and external use.
  • SAS and STC technology gurantee adhesion for real on site conditions.
  • Suitable under Floor Heating Systems.

HIGH-TECH

  • POT life : >= 3 hrs
  • Maximum thickness : =< 10 sq.mm
  • Shear adhesion (vitrified tiles) after 28 days : >= 2.5 N / sq.mm
  • Tensile adhesion (concrete/vitrified tiles) after 28 days : >= 2.5 N / sq.mm
  • Adhesion after water immersion : >= 2.5 N / sq.mm
  • Adhesion after freeze-thaw cycles >= 2.5 N / sq.mm
  • Colour : White
  • Coverage : 1.2 kg/sq.m per mm of thickness (Approx)
  • Packaging: 20kg in paper bag

 

20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹630
LARSEN STANDARD TILE ADHESIVE (GREY) SETFLEX EN 1208 G (LARSENSETFLEX1208KG20)



LARSEN St. flex 1208 develops extended work ability and a high standard of performance even in environment subject to extreme stress, meaning all types of ceramic tiles can be laid on mineral of cement based substrates.

 

PRODUCT STRENGTH

  • Floors and walls, for internal use.
  • Thickness up to 10mm
  • Suitable for laying single and double-fired ceramic tiles on mineral or cement-based substrates.
  • Open time >= 30 min.
  • Adjustability time >= 40 min.

HIGH-TECH

  • POT life : >= 4 hrs
  • Vertical slip : =< 0.5 sq.mm
  • Shear adhesion on ceramic biscuit after 28 days : >= 1 N / sq.mm
  • Tensile adhesion on ceramic after 28 days : >= 1 N / sq.mm
  • Heat Ageing : >= 0.5 N / sq.mm
  • Adhesion after freeze-thaw cycles >= 1 N / sq.mm
  • Colour : Grey and White
  • Coverage : 1.2 kg/sq.m per mm of thickness (Approx).
  • Packaging: 20kg in paper bag

20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹260
LARSEN STANDARD TILE ADHESIVE (WHITE) SETFLEX EN 1200 F&W (LARSENSETFLEX1200FANDWKG20)

LARSEN Set Flex 1200 F & W develops extended work ability and a high standard of performance even in environment subject to extreme stress, meaning all types of ceramic tiles can be laid on mineral of cement based substrates.

 

PRODUCT STRENGTH

  • Floors and walls, for internal and external use.
  • Ideal for Laying Aqua Expert systems.
  • Suitable for verified and ceramic tiles, large formats, low thickness slabs and stable natural stone.
  • Floors and walls, for internal and external use.
  • SAS and STC technology gurantee adhesion for real on site conditions.
  • Suitable under Floor Heating Systems.

HIGH-TECH

  • POT life : >= 3 hrs
  • Maximum thickness : =< 10 sq.mm
  • Shear adhesion (vitrified tiles) after 28 days : >= 2.5 N / sq.mm
  • Tensile adhesion (concrete/vitrified tiles) after 28 days : >= 2.5 N / sq.mm
  • Adhesion after water immersion : >= 2.5 N / sq.mm
  • Adhesion after freeze-thaw cycles >= 2.5 N / sq.mm
  • Colour : White
  • Coverage : 1.2 kg/sq.m per mm of thickness (Approx)
  • Packaging: 20kg in paper bag

 

20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹495
LARSEN AAC / CLC BLOCK ADHESIVE 40 KG PAPER BAG (GREY) (LARSENAACFIX20KG)

LARSEN AAC BLOCK ADHESIVE It is factory blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar for laying aerated light blocks' or smoothing over the block work surface in layers of up to 12mm thickness that meet and exceed the requirements of National and international Standards. APPLICATIONS: For interior and exterior use for preparing thin bed blocks mortar for AAC and cellular concrete blocks. ADVANTAGE Long working time. No curing required after block work done. Improved adhesion between two blocks. Fast & economical. SUITABLE SUBSTRATES: Concrete blocks. Cement mortar blocks/bricks. Concrete hollow blocks. Aerated light weight blocks. Cellur concrete blocks. Fly ash bricks. COVERAGE Approximately 125sq.ft. per 40kg bag when used at 3-4mm bed thickness. Coverage is based on smoothness and evenness of the substrate , size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder. Note: Coverage is based on the blocks size of 650mm X 240mm X 100mm. COMPLIANCE : Meets the following Standards. ANSI : A 118.1. EN:C1TE. ISI: Type 1 ADHESIVE. VOC:NIL

40 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹390
LARSEN AAC / CLC BLOCK ADHESIVE 20 KG PAPER BAG (GREY) (LARSENAACFIX20KG)

APPLICATIONS: For interior and exterior use for preparing thin bed blocks mortar for AAC and cellular concrete blocks. ADVANTAGE Long working time. No curing required after block work done. Improved adhesion between two blocks. Fast & economical. SUITABLE SUBSTRATES: Concrete blocks. Cement mortar blocks/bricks. Concrete hollow blocks. Aerated light weight blocks. Cellur concrete blocks. Fly ash bricks. COVERAGE Approximately 125sq.ft. per 40kg when used at 3-4mm bed thickness. Coverage is based on smoothness and evenness of the substrate , size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder. Note: Coverage is based on the blocks size of 650mm X 240mm X 100mm. COMPLIANCE : Meets the following Standards. ANSI : A 118.1. EN:C1TE. ISI: Type 1 ADHESIVE. VOC:NIL

20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹225
LARSEN STANDARD TILE ADHESIVE (GREY) SETFLEX EN 21 GR (LARSENSETFLEX21GRKG20)



LARSEN Standard Set Flex EN 21 GR is a specially formulated non-slip, flexible, standard setting, Cement based adhesive. It is suitable for beds of 3-12mm, interior, floor and wall applications. Standard Set Flex is suitable for fixing most types of tiles including porcelain natural stone and large format tiles. It is suitable for use in more demanding areas including with large format wall tiles, on timber substrates and in swimming pools.

 

PRODUCT INFORMATION

  • Form :-  Powder
  • Standard Colour (s) :-White
  • Hazard Information :-Irritant - Consult Safety Datasheet before use
  • Cleaning :-Clean tools, equipments etc. using warm water. Mechanical means are necessary when the product has set.
  • Packaging:-20kg, sealed paper sacks
  • Storage Conditions :-Store in sealed containers in dry conditions, protected from extremes of temperature
  • Shelf Life :-18 months in unopened manufacture's packaging

 

APPLICATION INFORMATION

  • Mix Proportions :- Mix 20kg powder with approx 4.5L water
  • Pot Life :- Approx 3hours @20°C
  • Application Temperature :-.+5 °C to + 45°C
  • Bed Thickness :-3-6mm (up to 10mm in small isolated areas)
  • Time to Traffic :-  Grout after 3 hours on walls/6 hours on floor Light Foot Traffic after 6 hours Full Traffic after 7 Days* (depending on site conditions)*
  • Coverage :- Approx 1.3Kg/m² per mm of thickness (Approx)

PERFORMANCE INFORMATION

  • Tensile Adhesion Strength :- ≥3.5 N/mm² (concrete/vitrified tiles) under all test conditions after 28 Days
  • Open and Adjustable Time :- ≥30min
  • Slip :-≤0.5mm
  • Classification :- EN12004 Type C2 TE

 

DIRECTION FOR USE

PREPARATION

General –All substrates should be clean and thoroughly sound; they should be free from standing water, oils, grease, dust, loose particles or any other contaminants which may interfere with adhesion. Gypsum Based Screeds require mechanical preparation by buffing, vacuuming etc. The screed must be tested to ensure it is dry.


20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹750
LARSEN STANDARD TILE ADHESIVE (GREY) SETFLEX EN 101 (LARSENSETFLEX101KG20)

LARSEN St. flex 101 develops extended work ability and a high standard of performance even in environment subject to extreme stress, meaning all types of ceramic tiles can be laid on mineral of cement based substrates.

 

PRODUCT STRENGTH

  • Floors and walls, for internal use.
  • Suitable for all types of glass mosaics, ceramic tiles on mineral or cement based substrates.
  • Open and adjustability time >= 30 min .
  • Up to 8 mm thickness

HIGH-TECH

  • POT life : >= 3 hrs
  • Shear adhesion after 28 days : >= 1 N / sq.mm
  • Tensile adhesion on concrete after 28 days : >= 1 N /sq.mm
  • Heat Ageing : >= 1 N /sq.mm
  • Adhesion after freeze-thaw cycles >= 1 N / sq.mm
  • Colour : Grey
  • Coverage : 1.3 kg/sq.m per mm of thickness (Approx)
  • Packaging: 20kg in paper bag

20 KG PAPER BAG PACKING, GST 18% EXTRA ON PRICE+SHIPPING
Add to Cart
₹240
Per Page      1 - 7 of 7