Special Offers

Sort By:  
5% gst extra on price + shipping charges
Add to Cart
₹619
₹639
(STD PKG 24 NOS) GST 18% EXTRA
Add to Cart
₹588
₹980
(STD PKG 48 NOS) GST 18% EXTRA
Add to Cart
₹325
₹542
CPVC PIPES AND FITTINGS
1-1/2" (40MM) (STD PACKING 10 NOS), GST 18% EXTRA
Add to Cart
₹445
₹783
CPVC PIPES AND FITTINGS
2" (50MM) (STD PACKING 10 NOS), GST 18% EXTRA
Add to Cart
₹730
₹1,283
TILE FIXING ADHESIVE GST 18% EXTRA ON PRICE+SHIPPING.RATES OF SHIPPING WILL BE DIFFERENT ON 9,12,16,20 AND 30 TONNES BASIS. PLEASE CONTACT FOR BEST RATES
Add to Cart
₹538
₹635
A FREE FLOWING SELF LEVELLING READY MIXED CEMENT FOR STRENGHT UPTO M 100 INTO 7 DAYS. 18% GST on shipping and product extra
Add to Cart
₹549
₹762
(STD PKG 384 NOS) GST 18% EXTRA
Add to Cart
₹44
₹74
A FREE FLOWING SELF LEVELING READY MIXED CEMENTITIOUS MATERIAL 18% GST on shipping and product extra
Add to Cart
₹549
₹762
(STD PKG 240 NOS) GST 18% EXTRA
Add to Cart
₹78
₹130
(STD PKG 96 NOS) GST 18% EXTRA
Add to Cart
₹184
₹308
TILE FIXING ADHESIVE .............18%GST ON PRICE+SHIPPING EXTRA. SHIPPING WILL BE DIFFERENT ON 9,12,16,20 AND 30 TONNES BASIS. PLEASE CONTACT FOR BEST RATES
Add to Cart
₹360
₹635
SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND 18% GST on product and shipping extra
Add to Cart
₹3,999
₹4,750
(STD PKG 144 NOS) GST 18% EXTRA
Add to Cart
₹114
₹190
A FREE FLOWING SELF LEVELLING READY MIXED CEMENT FOR STRENGHT UPTO M 100 INTO 7 DAYS. 18% GST on shipping and product extra
Add to Cart
₹551
₹762
CPVC PIPES AND FITTINGS
3/4" (20MM) (STD PACKING 50 NOS), GST 18% EXTRA
Add to Cart
₹146
₹256
THIN AND STRONG JOINTING MORTAR FOR AAC BLOCKS.............18%GST ON PRICE+SHIPPING EXTRA. SHIPPING WILL BE DIFFERENT ON 9,12,16,20 AND 30 TONNES BASIS. PLEASE CONTACT FOR BEST RATES
Add to Cart
₹562
₹762
CPVC PIPES AND FITTINGS
1-1/4" (32MM) (STD PACKING 15 NOS), GST 18% EXTRA
Add to Cart
₹325
₹571
for de-weeding ,tilling purpose GST 12% EXTRA
Add to Cart
₹64,299
₹66,830
Leader Solar Lantern EP31 (EP 31)
HSN 85437092
5% gst extra on price + shipping charges
Add to Cart
₹619
₹639
CPVC YELLOW SOLVENT CEMENT 946 ML TIN PKG (CPVTSOLV946T)
TO BE USED FOR ANY CPVC PIPE JOINTING Kisan Solvent Cement is used to join two or more pipes or join a pipe to a fitting or a fitting to a fitting. The quality of the Solvent Cement used plays a major role in the strenth of the joint formed. Kisan solvent Cement is renowed for its unmatched quality this make it very popular among our customer base.
(STD PKG 24 NOS) GST 18% EXTRA
Add to Cart
₹588
₹980
CPVC YELLOW SOLVENT CEMENT 473 ML TIN PKG (CPVTSOLV473T)
TO BE USED FOR ANY CPVC PIPE JOINTING Kisan Solvent Cement is used to join two or more pipes or join a pipe to a fitting or a fitting to a fitting. The quality of the Solvent Cement used plays a major role in the strenth of the joint formed. Kisan solvent Cement is renowed for its unmatched quality this make it very popular among our customer base.
(STD PKG 48 NOS) GST 18% EXTRA
Add to Cart
₹325
₹542
CPVC PIPES AND FITTINGS
CPVC PIPE 40 MM SDR13.5 (3 MTR) CLASS 2 (CPVCPIPE40MMSDR13.5)
CPVC PIPES AND FITTINGS ARE to be installed with help of CPVC solvent.
KML Classic CPVC Pipes are available in sizes ranging from 15mm (1/2") to 110mm (4") in diameter & are available in 5 metre & 3 metre lengths. KML Classic CPVC Pipes ranging from sizes 15mm (1/2”) to 50mm (2”) are manufactured as per IS : 15778 Class 1 SDR 11 & Class 2 SDR 13.5 specifications & carry the coveted BIS marking for CPVC Pipes. They also conform to ASTM standards such as ASTM D2846 for CPVC Hot & Cold Water Plumbing Systems. The higher diameter pipes ranging from 65mm (2") to 110mm (4") are manufactured as per ASTM F441 for Higher Diameter in Schedule 40 & 80. All Pipes are manufactured using the same compound as per ASTM D1784 Class 23447 B for CPVC Compounds. Due to the differences in the wall thickness of SDR 11 & SDR 13.5 pipes, at any given temperature, they have different pressure ratings.
1-1/2" (40MM) (STD PACKING 10 NOS), GST 18% EXTRA
Add to Cart
₹445
₹783
CPVC PIPES AND FITTINGS
CPVC PIPE 50 MM SDR13.5 (3 MTR) CLASS 2 (CPVCPIPE50MMSDR13.5)
CPVC PIPES AND FITTINGS ARE to be installed with help of CPVC solvent.
KML Classic CPVC Pipes are available in sizes ranging from 15mm (1/2") to 110mm (4") in diameter & are available in 5 metre & 3 metre lengths. KML Classic CPVC Pipes ranging from sizes 15mm (1/2”) to 50mm (2”) are manufactured as per IS : 15778 Class 1 SDR 11 & Class 2 SDR 13.5 specifications & carry the coveted BIS marking for CPVC Pipes. They also conform to ASTM standards such as ASTM D2846 for CPVC Hot & Cold Water Plumbing Systems. The higher diameter pipes ranging from 65mm (2") to 110mm (4") are manufactured as per ASTM F441 for Higher Diameter in Schedule 40 & 80. All Pipes are manufactured using the same compound as per ASTM D1784 Class 23447 B for CPVC Compounds. Due to the differences in the wall thickness of SDR 11 & SDR 13.5 pipes, at any given temperature, they have different pressure ratings.
2" (50MM) (STD PACKING 10 NOS), GST 18% EXTRA
Add to Cart
₹730
₹1,283
IC PRECIFIX 25 Kg BAG FOR TILE FIXING (PREMIUM) (ICPRECIFIX(P))
FOR TILE FIXING ON WALLS POLYMERIZED SOLUTION FOR BEST STRENGTH.
WWW.ICDRYMIX.COM
International Combustion (India) Ltd. forward integrates vide their technology and diversification into Manufacturing of Value Added Cement Based Dry Mix Products for Construction. The Division is known as Building Material Division. Its first manufacturing facility in Rajasthan and is a first of its kind in India, with an Integrated Dry Mix Plant along with a Sand Processing Unit from Limestone. The Dry Mix Plant with Fully-Automatic Controls, Packing and Truck Loading Systems has a capacity of 1.2 Lac/MT per Annum. WWW.ICDRYMIX.COM
TILE FIXING ADHESIVE GST 18% EXTRA ON PRICE+SHIPPING.RATES OF SHIPPING WILL BE DIFFERENT ON 9,12,16,20 AND 30 TONNES BASIS. PLEASE CONTACT FOR BEST RATES
Add to Cart
₹538
₹635
IC PRECIGROUT(N) 40 kg packing dry mixed grout for fast setting and heavy foundations (ICPRECIGROUT(N))
“IC PRECIGROUT” is General Purpose High Strength Cement based grouting material designed to transfer load effectively and safely, ensuring grouting precision and durability of structure. “IC PRECIGROUT” inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength. ic_precigrout “IC PRECIGROUT” has been carefully developed to optimum performance, even in the toughest applications along with unparalleled ease of application. It provides long life expectancy and maintains the rigid equipment to foundation connections which is necessary to meet demanding installation requirements. “IC PRECIGROUT” complies and exceeds the guidelines provided in ASTM C 1107/ C1107M and EN 1504-3 Class R4 “IC PRECIGROUT” can be used for the following: All kinds of Grouting work Setting Stanchion /turbine base plates Grouting of precision machinery Setting high strength anchor bolts Grouting of precast elements Steel column pads Filling of voids and jacketing applications Plugging of holes in concrete, etc. It can also be used for general grouting purposes in concrete such as patch repairs, crack filling, honey comb repairs, road repairs, quick fixing of window and door hold fasts, ceramic insulator jointing etc. Advantages Very high compressive and flexural strength at very short time. High pot life ensuring negligible wastage. Non-shrink grout with controlled positive expansion ensures proper load transfer and durability of structure. High fluid consistency and bleeding resistance. Quickly and easily placed by pouring or pumping. Resists chemical attack, oils, petroleum products, solvents, and mild caustic alkalis. No added chloride or gypsum. No bleeding and segregation at high fluid consistency. Excellent for dynamic and static loading conditions. Free of chlorides and additives, that may lead to corrosion. High drill resistance property. Self-compacting. Product variants available in both Flow-able and Normal Trowel-able consistency. Method of Application Surface Preparation Manual/mechanized method can be used for application. Ensure removal of voids within the material applied. Clean the excess material immediately, if any and can reuse within one hour. In case of addition of Aggregates, it is recommended to mix Aggregate at the ratio of 1:1 to “IC PRECIGROUT”. Mixing
Water to Powder Ratio: Water to “IC PRECIGROUT” Normal 16% and Flowable 17%
Small quantities of grout may be hand-mixed in a concrete mixing pan using triangular trowel or any suitable tool until lump-free homogeneous mass is obtained. For large quantities and continuous pours, mix using a mortar mixer (300 to 600 rpm) or appropriate grout pump. ic_precigrout_2 It is advisable to use a mechanical mixer for uniform and thorough mixing which saves time, labor and ensures maximum workability. More time may be required to mix manually, by using the same percentage of water to prepare the mix. “IC PRECIGROUT” powder is initially mixed with 80-90% of the recommended water ratio for 4-5 minutes in mechanical mixer and thereafter remaining 10% of water is to be added. Mix thoroughly for 2-3 minutes to obtain homogeneous mass. No extra water should be added to the mix. “IC PRECIGROUT” mixture should be applied within 1 hour of mixing with water. Let the grout stand for 5 minutes and re-mix for 2~3 minutes to ensure optimum dispersion and lump free paste. Method of Application Manual/mechanized method can be used for application. Ensure removal of voids within the material applied. Clean the excess material immediately, if any and can reuse within one hour. In case of addition of Aggregates, it is recommended to mix Aggregate at the ratio of 1:1 to “IC PRECIGROUT”. Placement The formwork if required, should be of waterproof material and should be placed properly to counter the hydrostatic forces of grout. “IC PRECIGROUT” is easily placed by pouring or pumping and compaction should be undertaken. Place grout on one side, flowing to opposite and adjacent sides, to avoid entrapment of air. When necessary, provide vent holes. The prepared grout material can be reused within the pot life. Excess material should be cleaned immediately after the application. Ensure that “IC PRECIGROUT” remain moist at least for 7 days for attaining desired strength. Method of Application with Aggregates The water requirement in case of “IC PRECIGROUT” mixed with aggregate will be approximately 8.5-11% depending the mixing ratio and the aggregate quality. It is very important to saturate the aggregates completely before mixing it to the Grout. This will ensure that the aggregates will not absorb water from the mix which may reduce the workability. This will also ensure the elimination of higher dust content if any around the aggregates which impairs the physical properties of Grout. Precautions Mixing of water with grout must be done homogeneously as per recommended water-powder ratio only. Do not add extra water to maintain flow or workability after the pot life is over. Clean all the tools and tackles and mixer machine after mixing till the grout is not hardened. Ideal temperature to grout is 10~35ºC. Adjust mixing water temperature while grouting “IC PRECIGROUT” in extreme cold and hot conditions. Open areas should be protected from rain wind and other aggressive climatic conditions for first 24 hours of grouting. In case of “IC PRECIGROUT” admixed with Aggregates 1:1, not saturated with water, it is very important to do the water correction depending upon the water absorption of the aggregates (it is very important to consider the dust around the aggregates which will also take lot of water while mixing) hence in this it is quite possible that water requirement may rise by 3% to 5% as mentioned for plain grout depending on the water absorption and dust in aggregate. Coarse aggregates if added, must be clean, hard, angular and roughly in cubical shape. Flaky and absorbent (more than 5% water absorption in 24 hour immersion) aggregates are not recommended for use as they deteriorate the quality of the finished application. Quality of aggregate plays a major role in strength, durability and workability if mixed in the grout. Judicious selection of aggregate is advisable to obtain desired parameters. Cleaning & Safety Remove excess material on tools and site using clean water and mechanical scrubbing before it hardens and difficult to dislodge. “IC PRECIGROUT” is non- toxic, however, as with any cementitious material, avoid prolonged contact with skin and dust inhalation. Packaging “IC PRECIGROUT” is available in 40 kg packaging. Storage & amp; Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks. “IC PRECIGROUT” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions. International Combustion (India) Ltd. forward integrates vide their technology and diversification into Manufacturing of Value Added Cement Based Dry Mix Products for Construction. The Division is known as Building Material Division. Its first manufacturing facility in Rajasthan and is a first of its kind in India, with an Integrated Dry Mix Plant along with a Sand Processing Unit from Limestone. The Dry Mix Plant with Fully-Automatic Controls, Packing and Truck Loading Systems has a capacity of 1.2 Lac/MT per Annum.
A FREE FLOWING SELF LEVELLING READY MIXED CEMENT FOR STRENGHT UPTO M 100 INTO 7 DAYS. 18% GST on shipping and product extra
Add to Cart
₹549
₹762
CPVC YELLOW SOLVENT CEMENT 29.5 ML TUBE (CPVTSOLV295)
TO BE USED FOR ANY CPVC PIPE JOINTING
(STD PKG 384 NOS) GST 18% EXTRA
Add to Cart
₹44
₹74
IC PRECIFLOOR 40 kg packing dry mixed FLOOR for fast curing/setting at places of heavy traffic in industry/roads (ICPRECIFLOOR)
International Combustion (India) Ltd. forward integrates vide their technology and diversification into Manufacturing of Value Added Cement Based Dry Mix Products for Construction. The Division is known as Building Material Division. Its first manufacturing facility in Rajasthan and is a first of its kind in India, with an Integrated Dry Mix Plant along with a Sand Processing Unit from Limestone. The Dry Mix Plant with Fully-Automatic Controls, Packing and Truck Loading Systems has a capacity of 1.2 Lac/MT per Annum.
A FREE FLOWING SELF LEVELING READY MIXED CEMENTITIOUS MATERIAL 18% GST on shipping and product extra
Add to Cart
₹549
₹762
CPVC YELLOW SOLVENT CEMENT 59 ML TIN PKG (CPVTSOLV59T)
TO BE USED FOR ANY CPVC PIPE JOINTING
(STD PKG 240 NOS) GST 18% EXTRA
Add to Cart
₹78
₹130
CPVC YELLOW SOLVENT CEMENT 237 ML TIN PKG (CPVTSOLV237T)
TO BE USED FOR ANY CPVC PIPE JOINTING Kisan Solvent Cement is used to join two or more pipes or join a pipe to a fitting or a fitting to a fitting. The quality of the Solvent Cement used plays a major role in the strenth of the joint formed. Kisan solvent Cement is renowed for its unmatched quality this make it very popular among our customer base.
(STD PKG 96 NOS) GST 18% EXTRA
Add to Cart
₹184
₹308
IC PRECIFIX 25 Kg BAG FOR TILE FIXING (STD) (ICPRECIFIX(STD))
FOR TILE FIXING ON WALLS POLYMERIZED SOLUTION FOR BEST STRENGTH.
WWW.ICDRYMIX.COM
International Combustion (India) Ltd. forward integrates vide their technology and diversification into Manufacturing of Value Added Cement Based Dry Mix Products for Construction. The Division is known as Building Material Division. Its first manufacturing facility in Rajasthan and is a first of its kind in India, with an Integrated Dry Mix Plant along with a Sand Processing Unit from Limestone. The Dry Mix Plant with Fully-Automatic Controls, Packing and Truck Loading Systems has a capacity of 1.2 Lac/MT per Annum. WWW.ICDRYMIX.COM
TILE FIXING ADHESIVE .............18%GST ON PRICE+SHIPPING EXTRA. SHIPPING WILL BE DIFFERENT ON 9,12,16,20 AND 30 TONNES BASIS. PLEASE CONTACT FOR BEST RATES
Add to Cart
₹360
₹635
IC PRECISEAL 25 KG BAG WATERPROOFING SOLUTION (ICPRECISEAL)
TO BE APPLIED BY MIXING OF WATER IN 2 COATS COVERS UPTO 250 SQ. FT. AREA APPROX ON CLEAN AND PLAIN NON-ABSORBING SURFACE

“IC PRECISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress.The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces.

“IC PRECISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048.

Features and Benefits:

“IC PRECISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality.
Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor.
Waterproofing coating system for new and existing surfaces.
Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapor to escape, diffusing the pressure buildup.
Highly effective for Positive & Negative sides of hydro-static pressure.

Positive side water Impermeability : 5-7 Bar
Negative side water impermeability: 1.5 Bar

Effectively seals all existing cracks in the surface.
Crack Bridging Capability : 1.5mm.
Good resistance against UV and Infrared Rays.Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures.No additional dead load on the structure after application.The surface is ready for any subsequent application within 48 Hrs.
Environment friendly coating, no VOC, improving the LEED score of the structure.
Areas of Application:
Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls.
Overhead and underground water tanks.
Swimming pools.
Toilets & Bathrooms.
Basements.
Canals & dams etc.
Method Of Application:
Surface Preparation All loosely adhering materials and dust is to be removed from the surface using a wire brush and potable clean water.Entire area should be pre-wetted thoroughly with potable water. Allow excess water to drain ensuring that there is no free standing or pooled water on surface just before application of
“IC PRECISEAL”.
Efflorescence, if visible must be treated carefully prior to application.In case of dry and absorbent substrates, the surface should be moistened with potable water.Concrete, screeds, block work should be sufficiently cured to avoid shrinkage cracks.
Ensure that all existing cracks are properly treated with polymer modified mortar prior to the application of “IC PRECISEAL”.
Cracks if any should be opened up in the “V” shape and repaired with thick slurry of “IC PRECISEAL” or polymer modified mortar prior to coating the entire area prior to the application of “IC PRECISEAL”.
Mixing proper and thorough mixing of the “IC PRECISEAL” is very important for optimum results.
It is advisable to use mechanical stirrer for uniform and thorough mixing and to save time and labor.
Mix “IC PRECISEAL” with 36-40% of potable water slowly to make homogeneous slurry.Take one third water in a bucket and add “IC PRECISEAL” into it. Prepare a lump free slurry by mixing homogeneously adding the rest of the water. Let the slurry stand for 3~5 minutes and stir again to ensure best possible dispersion of polymers.

Application:

“IC PRECISEAL” can be applied to the surface very conveniently with brush, roller or airless spray systems.After application of 1st coat, allow a gap of minimum 2 hours, before the subsequent coat. Average thickness of the coats should not be more than 0.6-0.8 mm per coat. Subsequent coats must be applied in perpendicular direction to the first coat.“IC PRECISEAL” can be applied by spray machine also. For large areas use of spray machine is recommended for better speed and economy.It is very important to apply “IC PRECISEAL” in a uniform thickness, which enables the product to withstand the requisite hydro-static pressure. Quantity of material required can be calculated by referring to the coverage. Ensure that the calculated quantity of material is applied on the surface for best results. 
Coverage:
Coverage of the product depends on the surface condition, its roughness and absorption. Smooth surfaces yield more coverage as compared to rough and irregular surfaces.Typically, “IC PRECISEAL” will cover 10-12 square feet per kg in two coats when mixed with 40% water under test condition.Precautions during Usage Avoid application of “IC PRECISEAL” in extreme climatic conditions under direct sunlight with very high ambient temperatures. Best is to apply early in the morning or late in the evening during such conditions.This is to ensure that the water which is used for mixing does not evaporate fast and the product is able to develop the design properties.In case of U/G tanks, O/H tanks or basement, it is quite possible that drying time may increase more than 2 hours. In such cases, ensure that first coat is dried properly before the application of the second coat.It is advised to use brush with soft bristles and after the application the brush should be cleaned properly.Hard/salty water is not recommended to be mixed with “IC PRECISEAL” which may deteriorate the performance of coating.Remove excess material on tools and site immediately as once hardened, “IC PRECISEAL” is very difficult to dislodge.Though “IC PRECISEAL” contains no Toxic material, care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or face, wash with plenty of clean water. Persons who are allergic to cement should take proper precautions before use.Packaging“IC PRECISEAL” is available in 25 kg packaging.Storage & Shelf LifeStore in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks.“IC PRECISEAL” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions.

SINGLE COMPONENT POLYMERIZED WATERPROOFING COMPOUND 18% GST on product and shipping extra
Add to Cart
₹3,999
₹4,750
CPVC YELLOW SOLVENT CEMENT 118 ML TIN PKG (CPVTSOLV118T)
TO BE USED FOR ANY CPVC PIPE JOINTING
(STD PKG 144 NOS) GST 18% EXTRA
Add to Cart
₹114
₹190
CPVC YELLOW SOLVENT CEMENT 10 ML TUBE (CPVTSOLV10)
TO BE USED FOR ANY CPVC PIPE JOINTING
(STD PKG 600 NOS)
Add to Cart
₹21
₹35
IC PRECIGROUT(F) 40 kg packing dry mixed grout FLOW-ABLE for fast setting and heavy foundations (ICPRECIGROUT(F))
“IC PRECIGROUT” is General Purpose High Strength Cement based grouting material designed to transfer load effectively and safely, ensuring grouting precision and durability of structure. “IC PRECIGROUT” inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength. ic_precigrout “IC PRECIGROUT” has been carefully developed to optimum performance, even in the toughest applications along with unparalleled ease of application. It provides long life expectancy and maintains the rigid equipment to foundation connections which is necessary to meet demanding installation requirements. “IC PRECIGROUT” complies and exceeds the guidelines provided in ASTM C 1107/ C1107M and EN 1504-3 Class R4 “IC PRECIGROUT” can be used for the following: All kinds of Grouting work Setting Stanchion /turbine base plates Grouting of precision machinery Setting high strength anchor bolts Grouting of precast elements Steel column pads Filling of voids and jacketing applications Plugging of holes in concrete, etc. It can also be used for general grouting purposes in concrete such as patch repairs, crack filling, honey comb repairs, road repairs, quick fixing of window and door hold fasts, ceramic insulator jointing etc. Advantages Very high compressive and flexural strength at very short time. High pot life ensuring negligible wastage. Non-shrink grout with controlled positive expansion ensures proper load transfer and durability of structure. High fluid consistency and bleeding resistance. Quickly and easily placed by pouring or pumping. Resists chemical attack, oils, petroleum products, solvents, and mild caustic alkalis. No added chloride or gypsum. No bleeding and segregation at high fluid consistency. Excellent for dynamic and static loading conditions. Free of chlorides and additives, that may lead to corrosion. High drill resistance property. Self-compacting. Product variants available in both Flow-able and Normal Trowel-able consistency. Method of Application Surface Preparation Manual/mechanized method can be used for application. Ensure removal of voids within the material applied. Clean the excess material immediately, if any and can reuse within one hour. In case of addition of Aggregates, it is recommended to mix Aggregate at the ratio of 1:1 to “IC PRECIGROUT”. Mixing
Water to Powder Ratio: Water to “IC PRECIGROUT” Normal 16% and Flowable 17%
Small quantities of grout may be hand-mixed in a concrete mixing pan using triangular trowel or any suitable tool until lump-free homogeneous mass is obtained. For large quantities and continuous pours, mix using a mortar mixer (300 to 600 rpm) or appropriate grout pump. ic_precigrout_2 It is advisable to use a mechanical mixer for uniform and thorough mixing which saves time, labor and ensures maximum workability. More time may be required to mix manually, by using the same percentage of water to prepare the mix. “IC PRECIGROUT” powder is initially mixed with 80-90% of the recommended water ratio for 4-5 minutes in mechanical mixer and thereafter remaining 10% of water is to be added. Mix thoroughly for 2-3 minutes to obtain homogeneous mass. No extra water should be added to the mix. “IC PRECIGROUT” mixture should be applied within 1 hour of mixing with water. Let the grout stand for 5 minutes and re-mix for 2~3 minutes to ensure optimum dispersion and lump free paste. Method of Application Manual/mechanized method can be used for application. Ensure removal of voids within the material applied. Clean the excess material immediately, if any and can reuse within one hour. In case of addition of Aggregates, it is recommended to mix Aggregate at the ratio of 1:1 to “IC PRECIGROUT”. Placement The formwork if required, should be of waterproof material and should be placed properly to counter the hydrostatic forces of grout. “IC PRECIGROUT” is easily placed by pouring or pumping and compaction should be undertaken. Place grout on one side, flowing to opposite and adjacent sides, to avoid entrapment of air. When necessary, provide vent holes. The prepared grout material can be reused within the pot life. Excess material should be cleaned immediately after the application. Ensure that “IC PRECIGROUT” remain moist at least for 7 days for attaining desired strength. Method of Application with Aggregates The water requirement in case of “IC PRECIGROUT” mixed with aggregate will be approximately 8.5-11% depending the mixing ratio and the aggregate quality. It is very important to saturate the aggregates completely before mixing it to the Grout. This will ensure that the aggregates will not absorb water from the mix which may reduce the workability. This will also ensure the elimination of higher dust content if any around the aggregates which impairs the physical properties of Grout. Precautions Mixing of water with grout must be done homogeneously as per recommended water-powder ratio only. Do not add extra water to maintain flow or workability after the pot life is over. Clean all the tools and tackles and mixer machine after mixing till the grout is not hardened. Ideal temperature to grout is 10~35ºC. Adjust mixing water temperature while grouting “IC PRECIGROUT” in extreme cold and hot conditions. Open areas should be protected from rain wind and other aggressive climatic conditions for first 24 hours of grouting. In case of “IC PRECIGROUT” admixed with Aggregates 1:1, not saturated with water, it is very important to do the water correction depending upon the water absorption of the aggregates (it is very important to consider the dust around the aggregates which will also take lot of water while mixing) hence in this it is quite possible that water requirement may rise by 3% to 5% as mentioned for plain grout depending on the water absorption and dust in aggregate. Coarse aggregates if added, must be clean, hard, angular and roughly in cubical shape. Flaky and absorbent (more than 5% water absorption in 24 hour immersion) aggregates are not recommended for use as they deteriorate the quality of the finished application. Quality of aggregate plays a major role in strength, durability and workability if mixed in the grout. Judicious selection of aggregate is advisable to obtain desired parameters. Cleaning & Safety Remove excess material on tools and site using clean water and mechanical scrubbing before it hardens and difficult to dislodge. “IC PRECIGROUT” is non- toxic, however, as with any cementitious material, avoid prolonged contact with skin and dust inhalation. Packaging “IC PRECIGROUT” is available in 40 kg packaging. Storage & amp; Shelf Life Store in a cool and dry place. Ensure that the bags does not burst or tear while handling. There should be a gap of 0.5 m from the walls to the stacks. “IC PRECIGROUT” will remain usable for a period of six months (6 Months) from date of manufacture when stored as per standard recommended conditions. International Combustion (India) Ltd. forward integrates vide their technology and diversification into Manufacturing of Value Added Cement Based Dry Mix Products for Construction. The Division is known as Building Material Division. Its first manufacturing facility in Rajasthan and is a first of its kind in India, with an Integrated Dry Mix Plant along with a Sand Processing Unit from Limestone. The Dry Mix Plant with Fully-Automatic Controls, Packing and Truck Loading Systems has a capacity of 1.2 Lac/MT per Annum.
A FREE FLOWING SELF LEVELLING READY MIXED CEMENT FOR STRENGHT UPTO M 100 INTO 7 DAYS. 18% GST on shipping and product extra
Add to Cart
₹551
₹762
CPVC PIPES AND FITTINGS
CPVC PIPE 20 MM SDR13.5 (3 MTR) CLASS 2 (CPVCPIPE20MMSDR13.5)
CPVC PIPES AND FITTINGS ARE to be installed with help of CPVC solvent.
KML Classic CPVC Pipes are available in sizes ranging from 15mm (1/2") to 110mm (4") in diameter & are available in 5 metre & 3 metre lengths. KML Classic CPVC Pipes ranging from sizes 15mm (1/2”) to 50mm (2”) are manufactured as per IS : 15778 Class 1 SDR 11 & Class 2 SDR 13.5 specifications & carry the coveted BIS marking for CPVC Pipes. They also conform to ASTM standards such as ASTM D2846 for CPVC Hot & Cold Water Plumbing Systems. The higher diameter pipes ranging from 65mm (2") to 110mm (4") are manufactured as per ASTM F441 for Higher Diameter in Schedule 40 & 80. All Pipes are manufactured using the same compound as per ASTM D1784 Class 23447 B for CPVC Compounds. Due to the differences in the wall thickness of SDR 11 & SDR 13.5 pipes, at any given temperature, they have different pressure ratings.
SELEC| PLA| Jigo| ASCO| Greaves Cotton| SCHNEIDER| Rishabh| Yaskava| Pepper+Fuchs| HPL| POLYCAB| Indoasean| SIBASS| SU-KAM POWER| WAAREE| ALSTOM| EMERSON| Neptune| Baumer| BALDOR| LAPP| Mahindra| NGEF| Steelgrip,| Allen Bradley| CUMMINS| MARATHON| RAVIN CABLES| Ashok Layland| Compaq| Minilec| VERITEK| Moller| Chint| CTR| Teknic| Specher & Schuh| Krykard| SYSKA| Wago| Raychem RPG| Vishay| HEX| BCH| Delta| FCG| Wartsila| Jenitsa| 3M| FLUKE| B&R| Meccalte| D-Link| VOLTAMP| CG| Hindustan Motors| Osram| Kohler| Furse| GIC| Hensel| Eicher| HAGER| Rittal| TATA LIBERT| Carlo Gawazzi| Jainson| LEGRAND| Kirloskar Electric| OKAYA POWER| Terasaki| OBLUM| LUMINOUS| Weidmuller| C&S| ELPRO| Rex-Roth| Standard| Elsteel| Leuze| TMEIC| Anybus| Connectwell| Honeywell| Nord| DEHN| COOPER BUSSMAN| SOCOMEC| BHEL| Kubler| Selectron| BonFiglioli| Huphen| Vacon| Crompton Greaves| Epcos| Vitzro| Pilz| RIELLO| Elmex| tyco| Vaishno| Hitachi| MERSEN| MICROLECTRICA| GE| Vinay| Mitsubhishi| Toshiba| SANYO| BHARAT BIJLEE| SIEMENS| RR Kabel| Megawin| Fuji| Crouzet| L&T| COSMOS| AE| AMAR RAJA| Stamford| CHHABI ELECTRIC| Indiabulls| CONSUL NEOWATT| EXIDE| Baumuller| Omron| Namolectric| Telemecanique| SHREEM| Cutler-Hammer| Surya| Mimic| DANFOSS| Wipro| ASHIDA| Laxmi Hydraulics| SKIPPER| APC| WEG| Bosch| Universal| Phillips| Citel| ELECTRONICON| Kaycee| Secure| Hikson| Rockwell| Salzer| Jyoti| COMET| MOOG| Panasonic| CCI| KAPPA| Powerica| Bajaj Electricals| KEI| Uttam| Meco| KEC| Caterpillar| Wika| Microtek| OEN| Dowells| Malde capacitors| Anchor| Fanuc| Phoenix| OBO-Bettermann| Tesla| SHAVISON| PROK| Havells| Jaquar| ABB| EAPL| FINOLEX| Eaton| ENSTO| Jai Balaji
3/4" (20MM) (STD PACKING 50 NOS), GST 18% EXTRA
Add to Cart
₹146
₹256
IC PRECIJOINT(P) AAC BLOCK ADHESIVE READY MIXED (PREMIUM) (ICPRECIJOINT(P))
High bond strength: special polymer impart high adhesion strength, increasing the durability of masonry.

Negligible Shrinkage Cracks: Water retention properties reduce shrinkage cracks.
High Thermal Insulation: Thin - joints prevent transfer through walls.
High tensile strength between masonry blocks.Ease of mixing and application of mortar.
No water curing required.Negligible wastage & higher coverage.
3 mm joint thickness leads to faster and economical application.Reduces the thickness of subsequent application.
IC PRECIJOINT can be applied for thickness as low as2-3 mm.
International Combustion (India) Ltd. forward integrates vide their technology and diversification into Manufacturing of Value Added Cement Based Dry Mix Products for Construction. The Division is known as Building Material Division. Its first manufacturing facility in Rajasthan and is a first of its kind in India, with an Integrated Dry Mix Plant along with a Sand Processing Unit from Limestone. The Dry Mix Plant with Fully-Automatic Controls, Packing and Truck Loading Systems has a capacity of 1.2 Lac/MT per Annum.
THIN AND STRONG JOINTING MORTAR FOR AAC BLOCKS.............18%GST ON PRICE+SHIPPING EXTRA. SHIPPING WILL BE DIFFERENT ON 9,12,16,20 AND 30 TONNES BASIS. PLEASE CONTACT FOR BEST RATES
Add to Cart
₹562
₹762
CPVC PIPES AND FITTINGS
CPVC PIPE 32 MM SDR13.5 (3 MTR) CLASS 2 (CPVCPIPE32MMSDR13.5)
CPVC PIPES AND FITTINGS ARE to be installed with help of CPVC solvent.
KML Classic CPVC Pipes are available in sizes ranging from 15mm (1/2") to 110mm (4") in diameter & are available in 5 metre & 3 metre lengths. KML Classic CPVC Pipes ranging from sizes 15mm (1/2”) to 50mm (2”) are manufactured as per IS : 15778 Class 1 SDR 11 & Class 2 SDR 13.5 specifications & carry the coveted BIS marking for CPVC Pipes. They also conform to ASTM standards such as ASTM D2846 for CPVC Hot & Cold Water Plumbing Systems. The higher diameter pipes ranging from 65mm (2") to 110mm (4") are manufactured as per ASTM F441 for Higher Diameter in Schedule 40 & 80. All Pipes are manufactured using the same compound as per ASTM D1784 Class 23447 B for CPVC Compounds. Due to the differences in the wall thickness of SDR 11 & SDR 13.5 pipes, at any given temperature, they have different pressure ratings.
1-1/4" (32MM) (STD PACKING 15 NOS), GST 18% EXTRA
Add to Cart
₹325
₹571
Per Page      1 - 20 of 32